Dell E228WFP appendix Using the OSD Menu, Auto Adjust Power Button and Indicator

D

E

Auto Adjust

Power Button and Indicator

Use this button to activate automatic setup and adjust menu. The following dialog appears on a black s monitor self-adjusts to the current input:

Auto Adjust In Progress

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustm further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Setti

NOTE: Auto Adjust will not occur if you press the button while there are no active video input or attached cables.

Use the power button to turn the monitor on and off.

The green light indicates the monitor is on and fully functional. An amber light indicates power save mod

Using the OSD Menu

NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.

1. Push the MENU button to open the OSD menu and display the main menu.

Main Menu for Auto Detect Analog (VGA) Input Main Menu for Auto Detect Digital (DVI) Input

or

Main Menu for Analog (VGA) Input Main Menu for digital (DVI) Input