Dell Fixing 'Cannot Display This Video Mode' Errors - E228WFP Manual
Page 30

Factory Reset:

Reset the OSD menu options to the factory preset values.

Exit — Select to exit out of Reset to Factory Settings menu without resetting any OSD options.

Position settings only — Change the settings for Image Position back to original factory settings.

Color settings only — Change the Red, Green, and Blue settings back to their original factory settings and

All settings — Change all the user-adjustable settings including color, position, brightness, contrast, and language of the OSD does not change.

DDC/CI: — Enable the DDC/CI control function.

DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color ba PC.

Default is "Enable". You can disable this feature by selecting "Disable".

For best user experience and optimum performance of your monitor, keep this feature enabled.

NOTE: If user select "Disable", display Warning message box as below. Select "Yes" disable DDC/CI and return to "Reset to Factory Settings" menu. Warning message time-out in 20 sec.

OSD Warning Messages

One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization.

1: Auto Detect (Analog Input)

or

1: Auto Detect (Digital Input)

Cannot Display This Video Mode

Cannot Display This Video Mode

 

Optimum resolution 1680 x1050 60Hz

 

Optimum resolution 1680 x1050 60Hz

 

 

 

2: Analog Input

or

3: Digital Input

Cannot Display This Video Mode

Cannot Display This Video Mode

 

Optimum resolution 1680 x1050 60Hz

 

Optimum resolution 1680 x1050 60Hz

This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use. See Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1680 X 1050 @ 60Hz.

NOTE: The floating Dell Self-test Feature Check dialog appears on-screen if the monitor cannot sense a signal cable .

or

Page 29 Page 31
Image 30
Page 29 Page 31
Contents About Your Monitor Solving Problems Dell E228WFP Flat Panel Monitor Users GuideAbout Your Monitor Front ViewBack View Bottom View Monitor SpecificationsPower Management Modes Side ViewPin Number Monitor Side of the 15-pin Side Signal Cable Pin AssignmentsResolution Plug and Play CapabilityGeneral Display Mode Preset Display ModesPhysical Characteristics ElectricalLCD Monitor Quality & Pixel Policy Caring for Your MonitorEnvironmental Appendix FCC Identification InformationService Type Contacting DellBritish Virgin Islands Brunei Bahamas Barbados Belgium BrusselsBermuda Bolivia Brazil Canada North York, OntarioCosta Rica China XiamenColombia Czech Republic PragueGermany Frankfurt France Paris MontpellierCorporate GreeceItaly Milan Customer ServiceIreland Cherrywood Jamaica Japan KawasakiLuxembourg Korea SeoulLatin America Malaysia PenangSlovakia Prague Panama Peru Poland WarsawPortugal South Africa JohannesburgSwitzerland Geneva Southeast Asian and Pacific Countries Spain MadridSweden Upplands Vasby TaiwanFinancial Services Uruguay A. Austin, TexasVirgin Islands Venezuela Setting Up Your Monitor If you have a Dell desktop with no internet accessATI Setting Up Your Monitor Select Advanced Setting Up Your Monitor Dell E228WFP Flat Panel Color Monitor Connecting Your Monitor Using the Front Panel ButtonPage Using the OSD Menu Auto Adjust Power Button and IndicatorIcon Menu and Submenus Exit Brightness/Contrast Description Positioning Horizontal VerticalAuto Adjust In Progress Page Page Factory Reset OSD Warning MessagesSetting the Optimal Resolution Using the Dell Soundbar OptionalSoundbar Attachment to the Monitor Back to Contents Solving Problems Troubleshooting Your MonitorGeneral Problems Possible SolutionsProduct Specific Problems Troubleshooting Your SoundbarAttaching the Stand Using Your Monitor StandUsing the Tilt Organizing Your CablesRemoving the Stand
Related manuals
Manual 2 pages 33.11 Kb
Top Page Image Contents