Dell P221-OH Display Use the Display Settings to adjust image Wide Mode, Horizontal P Osition

Display

Use the Display Settings to adjust image.

Settings

Wide Mode

Adjust the image ratio as 4:3 or full screen.

Horizontal P

osition

Use the

or

to adjust image left or right. Minimum is '0' (-). Maximum is '100' (+).

Vertical Pos

ition

Use the

or

to adjust image up or down. Minimum is '0' (-). Maximum is '100' (+).

Sharpness

This feature can make the image look sharper or softer. Use

or

to adjust the sharpness from '0' to '100'.

Pixel Clock

The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.

Use the

or

to adjust for best image quality.

Phase

If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase

(fine) again.

NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.

Reset

Select this option to restore default display settings.

Display

Settings

Other

Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on

Settings

screen, and so on.

Language

Language option to set the OSD display to one of eight languages (English, Espanol, Francais, Deutsch, Brazilian Portuguese,

Russian, Simplified chinese or Japanese).

Menu Trans

Select this option to change the menu transparency by pressing 1st or 2nd buttons (Minimum: 0 ~ Maximum: 100).

parency

Menu Timer

OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.

Use the

or

to adjust the slider in 5 second increments, from 5 to 60 seconds.

Menu Lock

Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All buttons are locked.

NOTE: When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with OSD Lock

selected. Select "Unlock" to unlock and allow user access to all applicable settings.

Menu

Rotates the OSD by 90 degrees counter-clockwise. Your can adjust the menu according to your Display Rotation.

Rotation

Power Save

To turn on or off Audio Power during Power Save mode.

Audio

DDC/CI

DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable

via software on your computer. You can disable this feature by selecting "Disable".

Enable this feature for best user experience and optimum performance of your monitor.