Dell 170S appendix Using the On-Screen Display OSD Menu, Icon Menu Name and Sub- menus Description

Page 14

Indicator

Direct-Access Functions

Function

Auto adjustment

Brightness/Contrast

Adjustment Method

Use this button to activate automatic setup and adjustment. The following dialog will appear on screen as the monitor self-adjusts to the current input:

Auto Adjustment in Progress...

Auto Adjustment button allows the monitor to self-adjust to the incoming video signal. After using 'Auto Adjustment', you can further tune your monitor by using the 'Pixel Clock' and 'Phase' controls in the OSD.

NOTE: Auto Adjust will not occur if you press the button while there are no active video input signals, or attached cables

With the menu off, press thebutton to display the 'Brightness' and 'Contrast' adjustment menu.

The 'Brightness' function adjusts the luminance of the flat panel.

Adjust 'Brightness' first, then adjust 'Contrast' only if further adjustment is necessary.

"+" increase 'brightness' " - "decrease 'brightness'

The 'Contrast' function adjusts the degree of difference between darkness and lightness on the display screen.

"+" increase the 'contrast' "-" decrease the 'contrast'

Using the On-Screen Display (OSD) Menu

Accessing the Menu System

1. With the menu off, press the MENU button to open the OSD system and display the main features menu.

A

Function icons

B

Main Menu

C Menu icon

D

Sub-Menu name

E

Resolution

 

2.Press the - and + buttons to move between the function icons. As you move from one icon to another, the function name is highlighted to reflect the function or group of functions (sub-menus) represented by that icon. See the table below for a complete list of all the functions available for the monitor.

3.Press the MENU button once to activate the highlighted function. Press -/+ to select the desired parameter, press menu to enter the slidebar then use the - and + buttons, according to the indicators on the menu, to make your changes.

4.Press the MENU button once to return to the main menu to select another function or press the MENU button two or three times to exit from the OSD.

Icon

Menu Name and Sub- menus

Description

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Dell E170S/E190S Flat Panel Monitor Users Guide Package Contents About Your MonitorBack View Product FeaturesIdentifying Parts and Features Front View Front View Front panel controls Label DescriptionDescription/Use Side ViewBack view Label Bottom View Monitor SpecificationsPower Management Modes Flat Panel Specifications Pin AssignmentsElectrical ResolutionPreset Display Modes Model E170S/E190SPlug and Play Capability Physical CharacteristicsEnvironmental Caring for Your Monitor Maintenance GuidelinesLCD Monitor Quality & Pixel Policy Appendix Setting Up Your Monitor Select Advanced Power Button Using the Front PanelAuto Adjust Operating the MonitorUsing the On-Screen Display OSD Menu Icon Menu Name and Sub- menus DescriptionImage settings This is used to exit out of the Main MenuSettings Location Color SettingsPreset sRGB PositionFactory Reset Setting the Maximum Resolution OSD Warning MessagesTilt Using the Dell Soundbar OptionalUsing the Tilt Back to Contents Setting Up Your Monitor Dell E170S/E190S Flat Panel Monitor Connecting the blue VGA cable Setting Up the MonitorConnecting Your Monitor Attaching the StandRemoving the Stand Organizing Your CablesAttaching the Soundbar Optional Back to Contents Self-Test Solving ProblemsBuilt-in Diagnostics Common Problems Common Symptoms What You Experience Possible SolutionsProduct-Specific Problems Troubleshooting the Dell Soundbar OptionalBack to Contents
Top Page Image Contents