Datacard Group SP75 manual Datacard Duragard Virtual EDGE-TO-EDGE Laminates, Jvc

DATACARD® DURAGARD® VIRTUAL EDGE-TO-EDGE LAMINATES

Each SP75 Plus card printer includes either one or two laminators, both capable of running Datacard® DuraGard® Clear or Secure Laminates and Clear or Secure Topcoats. Two laminators allow customers to use two different laminates or topcoats for added security and/or increased production. DuraGard Virtual Edge-to-Edge Laminates are larger in size and cover more of the card surface than laminates designed for use in the Datacard® Magna™ Class printers and Datacard® ImageCard™ IV card printers.

+Clear and secure topcoat

+DuraGard 0.5 mil clear and 0.6 mil secure laminate

+DuraGard 1.0 mil clear and secure laminate

The SP75 Plus laminator and laminate supply design has allowed Datacard to increase the size of all DuraGard laminates and improve the consistency in which each laminate is applied to the card. The result is that all cards laminated on the SP75 Plus card printer include DuraGard Virtual Edge-to-Edge Laminate which covers over 95% percent of the card surface, increasing the security and durability of all cards printed and laminated on the SP75 Plus card printer. The laminate edge and the card edge are virtually the same.

Superior Laminate Patch Coverage:

DuraGard laminates used in the SP75 Plus card printer are larger

than any other CR80/ID1 size laminates

Manufacturer	Laminate	Laminate	Edge	Edge
Printer	Height	Width	Margins (Top	Margins (Left
			and Bottom)	and Right)

Datacard Laminates
ImageCard® Printer Series Laminates		2.00	3.25	0.063	0.060
SP75 Plus (virtual edge-to-edge) Laminates		2.06	3.31	0.030	0.030
95.5% Coverage				50% decrease in edge margin
Fargo Laminates		2.00	3.25	0.063	0.060
90.8% Coverage	DTC Printers
90.8% Coverage	Pro-LX	2.00	3.25	0.063	0.060
Zebra Laminates		2.00	3.24	0.063	0.065
90.4% Coverage	P500 & P520
94.5% Coverage	P620 & P720	2.05	3.30	0.038	0.035
	(linerless)
MagiCard Laminates		2.00	3.25	0.063	0.060
90.8% Coverage	Sicura Laminator
Nisca Laminates		2.00	3.25	0.063	0.060
90.8% Coverage	PR5101
JVC		1.98	3.22	0.073	0.075
89% Coverage	CX710

All dimensions in inches

Nominal card dimensions are 2.125” by 3.370” (CR80 cards)

All laminates are carrier-based, except P620 and P720, which are linerless laminates Datacard ImageCard Printer Laminates include the laminates used in the

Datacard® ImageCard™ IV printer

Datacard® ImageCard™ Magna™ Class printer

Datacard® Magna™ Class card printer with Advanced Imaging Technology™ Datacard® Magna™ Platinum™ Series card printer

Dimensional measurements were obtained from competitive websites and the measurement of competitive supplies.

Page 10 of 25 Datacard Group Confidential