Datacard Group SP75 manual Can you laminate twice on one-side of the card?

Page 19

Q.Can you laminate twice on one-side of the card?

A.Topcoat can be applied twice on the front side.

Q.Can ribbons, laminates and topcoats defaults still be adjusted via the driver even though they are identified by the RFID tag?

A.Yes.

Q.Is the Hardware Lock Option field upgradeable?

A.No, this must be purchased at time of printer order.

Q.Is the second laminator option field upgradeable?

A.No, this must be purchased at time of printer order.

Q.What happens if customer wants to switch from a Datacard® DuraGard® laminate to a Datacard® Topcoat or vice versa using the laminator module?

A.The laminator adjusts to the material that is in it, so there is no longer a need to call out which laminator you want. Both Topcoat and DuraGard laminate material can be used in the laminator module.

Q.Is there a SDK available for the new contact/contactless SCM reader?

A.Printer and driver support the new contact/contactless SCM reader. Driver does not provide any additional SDK for the new contact/contactless SCM reader.

Q.Why do Datacard→ SP Plus Series print ribbons come in “Ribbon Kits”?

A.We have simplified the supply cleaning and ordering process by including one isopropanol cleaning card and one adhesive cleaning roller in every box of print ribbon. This provides end-users with the convenience of having the cleaning supplies at your fingertips to help maintain the optimum performance of your SP Plus series card printer. We recommend performing a cleaning cycle and replacing the adhesive sleeve each time you load a new print ribbon.

Q.Why are the Datacard→ DuraGard→ laminates used in the SP75 Plus printer called “Virtual

Edge-To-Edge” laminates?

A.While the process for manufacturing old-style laminates has been fine-tuned throughout the years, it still provides a wide variation in how the laminate is applied to the card. This result is a highly- noticeable margin around the card where one can see the edge of the laminate approximately 0.060 inches from the edge of the card. For many customers, this margin is not acceptable.

To respond to this input from our customers, Datacard Group has improved the manufacturing process and application process for DuraGard laminates, and the result is larger laminates that are “virtually” the same size as the printed card. In other words, the size of the laminate is slightly smaller than the size of the card, but the difference is so slight, few will ever notice the difference. This is a competitive advantage for the SP75 Plus printer.

Q. What benefits are available when Datacard→ ribbons are used on the SP75 Plus card printer?

A.All Datacard→ print ribbons for the SP75 Plus card printer are equipped with Intelligent Supplies Technology™. This innovative new technology utilizes a specially engineered RF tag embedded onto the ribbon take-up core. Each RF tag is individually programmed with important information about the ribbon. The SP75 Plus card printer requires the RF tag on the take-up core and the

Page 19 of 25

Datacard Group Confidential

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page Table of Contents Datacard SP75 Plus Printer Introduction SP Plus Series Printer OverviewKEY SP75 Plus Printer Improvements Product Positioning Datacard Printers KEY Selling PointsSP75 Plus Printer Product Positioning Datacard PrintersYour best choice for supplies Supplies OverviewDistinctive Blue Core with Platinum Flecks Color Ribbon Kits Ribbon SaverAutomatic Ribbon Identification Ribbon Low Warning and On-Line Supplies OrderingSupply Yield SP25 SP35 SP55 SP75 Plus NEWJVC Datacard Duragard Virtual EDGE-TO-EDGE LaminatesMonochrome Ribbon Kits Greater Variety of Security and Durability SuppliesSupply Item Yield SP25 SP35 SP55 SP75 Plus Supply Item SP25 SP35 SP55 SP75 Plus Cleaning SuppliesPrinter Standard Features BID SpecificationsMarket Opportunities Standard Specifications Page − IAT Agency ApprovalsWhat driver does the SP75 Plus card printer use? Frequently Asked QuestionsIs the SP75 Plus card printer field upgradeable? How many cards can the High Capacity Output Hopper hold?Is there a reject bin? What is the printer warranty?Is there a special cleaning card for the laminator? How does the card debower work and can it be adjusted?Is the second laminator option field upgradeable? Is the Hardware Lock Option field upgradeable?Can you laminate twice on one-side of the card? What is the Ribbon Saver feature and how does it work? Printer Can I use monochrome ribbons in an SP75 Plus card printer?Ordering and Pricing Information Msrp US$Product Spotlight Statements Important DatesWords Competitive Analysis Datacard Evolis Fargo Zebra Competitive AnalysisAdditional Information
Top Page Image Contents