Left Button Functions:
ØWith the printer OFF, a short push will turn the printer ON.
ØWith the printer ON, a short push will toggle the printer from « ON LINE » to « OFF LINE » mode.
ØWith the printer OFF, a long push will turn the printer ON and put the printer into dump mode.
ØWith the printer ON, a long push will reset the printer and return the previous mode.
Right Button Functions:
ØWith the printer « OFF LINE » and paper roll selected, a short push will feed a blank line.
ØWith the printer « OFF LINE » and paper roll selected, a long push will feed a full page.
ØWith the printer « OFF LINE » and label roll selected, any push will feed a blank label.
ØResets the printer to the previous mode before it was automatically switched to the idle mode.
ØWith the printer « OFF LINE » hold the button down until the Autotest page prints, (about 2 seconds).
Note: A simultaneous push on both buttons when the printer is OFF brings up the configuration menu that will be printed on the paper roll.
4.1.2 Operating Mode and Indicator Status
Red | Green | Operating Mode | Comments |
Indicator | Indicator |
|
|
OFF | OFF | Printer OFF |
|
OFF | Flashing | Printer ON, idle mode | Indicator flashing every 2 |
|
|
| seconds |
ON | ON | Printer ON , « ON LINE » |
|
ON | OFF | Printer ON, « OFF LINE » |
|
ON | Blinking | Printer ON | Indicator Blinking |
|
| Setting Mode |
|
Blinking | OFF | Printer ON, no paper | Indicator Blinking |
Blinking | OFF | Printer ON, head up | Indicator Blinking |
ON | Blinking | Printer ON, head too hot | Indicator Blinking |
Blinking | Blinking | Download | Flash Memory Update |
ON | ON | Printer in dump mode | Dump mode written on first line |
ON | ON | Printer in Autotest mode | Autotest written on first line |
10 |
|