6.1 Media
ITEM | SPECIFICATION |
|
|
Media type | Direct thermal paper and direct thermal labels |
|
|
Maximum media width | 3.35” (85mm) |
|
|
Roll dimensions | 2.36” (60mm) maximum diameter |
|
|
6.2User Interface
ITEM | SPECIFICATION |
|
|
Power supply connector | Jack type male socket |
(rear) |
|
Communication connector | RJ12 socket |
(rear) |
|
Red LED (upper side) | « ON / OFF » and error |
|
|
Green LED (upper side) | « ON/OFF LINE » , Menu, idle mode |
|
|
Left hand push button (upper | « ON/OFF », « ON LINE », « YES » functions |
side) |
|
Right hand push button | Line and form feed « LF/FF » and « NO » |
(upper side) | function |
Parameter settings (printout | Push button entry (with a simultaneous push on |
menu) | both buttons) |
6.3Communications
ITEM | SPECIFICATION |
|
|
Communication type | RS232C |
|
|
Parameter settings | Printout menu |
(configuration mode) |
|
Baud rate | 1200 to 115200 baud (step by step) |
|
|
Data format | 7 or 8 bits data bits |
| With or w/o parity bit (odd or even) |
| 1 Start bit 1 Stop (free) |
Data exchange control | Xon / Xoff or DTR/RTS |
| (active at 0 or 1 level) |
| 33 |