20/22

Problem	Possible solution

Color defects	Check that the signal cable connector is properly connected and that
	the connection pins are not bent or damaged. Try another color
	temperature.
Size, position,	Adjust the picture characteristics as described in the section OSD
shape or quality	Adjustment(4-3).
unsatisfactory
Duplicated	A problem with your graphics adapter or display unit. Contact your
images	service representative.
Image is not	Check that the display resolution and frequency from your PC or
stable	graphic adapter is an available mode for your monitor.
	In your PC, you can check through Control panel, Display, Settings.
	If the setting is not correct, use your computer utility program to
	change the display settings.
Message :	Check that the signal cabel connector is properly connected and that
No signal	the connection pins are not bent or damaged.
	If the connector is loose, tighten the connector’s screws.
	Check that the computer is switched on.
The power LED is	To enter a power saving mode. You can reactivate the system by
a orange color	pressing any key or moving the mouse.