Installation
Installation and service must be performed by a quali- fied installer, service agency or your natural gas or liquid propane (LP) gas provider..
Installation must conform with local building and/or fire codes, or in the absence of local codes:
•National Fuel Gas Code ANSI Z223.1 / INFPA 54 (for installation in the United States)
•CSA B149.1 Natural Gas and
Location
Place your firepit or fireplace on a flat and stable surface in an outdoor location such as a patio deck. Do not locate the appliance where it can get excessively wet or submerged in water.
When determining a suitable location, take into account concerns such as exposure to wind, proximity to traffic paths, and windows that open into the home.
Locate your firepit or fireplace adjacent to the gas supply line (LP or NG), preferably with the shortest gas line run possible.
Maintain the following clearances to combustible materials on all Cal Flame fireplaces and fire pits. Measure from the outside of the unit.
Sides (all around) | 48 inches (1.2 m) |
Top | 72 inches (1.8 m) |
5
Installation / Assembly
Your Cal Flame firepit or fireplace is designed and in- tended for OUTDOOR USE ONLY in a well ventilated space and must not be used inside a building, garage, or any other enclosed area..
2009 Fireplaces and Firepits
LTR20091006, Rev. B | www.calspas.com |
