Cal Flame LTR20091006 manual Fire Pit Burner Installation

Fire Pit Burner Installation

The log set and crushed lava rock are shipped together on applicable models. Remove the log set and un-pack all components. The logs are fragile -- use care when handling.

Turn the fire pit on its side. Connect the piezoelectric starter and attach the flex hose for the gas supply.

Place the fire pit back down on its pedestal. Attach the gas flex hose to the burner.

Note: If you want to convert the orifice from LP to NG, this is location of the orifice. See next page for gas converstion instructions.

2009 Fireplaces and Firepits

13

Installation / Assembly

LTR20091006, Rev. B www.calspas.com