Fireplace Log Set Placement
The log set, log grate and crushed lava rock are shipped together on applicable models. Remove the log set and
Once the fireplace is in position, level and safely hooked up to the proper fuel supply, install the log grate over the plate burner.
Place the lava rock around the flat burner plate. DO NOT place the lava rock on the burner plate as it will affect the flow of the flame.
Place the ceramic fire logs on the grate. Start by laying one log in the center of the grate length wise.
Lay the other logs (quantity may vary by unit type) over the first log as shown below.
NOTE: Be sure unit is cool before touching any of the compo- nents..
Place two logs lengthwise in the grate and position remaining logs over them in an angled position as shown. Ensure the logs are placed securely to avoid any movement.
15
Installation / Assembly
18” Log Set | 24” Log Set |
2009 Fireplaces and Firepits
LTR20091006, Rev. B | www.calspas.com |
