Cortelco network adaptor setup guide Handset

Page 5

Optional Connection: If you want to use the telephone for voice communications while the modem is not in use, connect the included coiled handset cord to the telephone handset and the DPA jack labeled

HANDSET.

If you have connected the telephone handset to the DPA lift the telephone handset and listen for a dial tone. If you do not hear the dial tone, check your connections to ensure they match those shown in the diagram below.

Return the handset to the cradle until you are ready to go on-line using your modem and the DPA.

Image 5

Contents Data Port Anywhere Contacting Konexx Table of ContentsWhy Data Port Anywhere DPA? System Requirements Windows 98 or later Pre-InstallationData Port Anywhere Installation Handset To enter the x3 in Windows 98 Windows 2000 see Windows Connection SetupSelect Connection TAB To enter the x3 in Windows Page Establishing Your Connection Return the telephone handset in the cradle For Windows 2000 see next Locating a Host Modem Phone Number WindowsLocating a Host Modem Phone Number Windows Page See Listings for Avaya Level Switch Settings TableIBX SRX Level Switch Settings Table Operating Tips and Troubleshooting System Requirements Part FCC RequirementsFCC Warning Statement Industry Canada IC RequirementsWarranty for Warranty/Registration Card see back panel What type of phones are you connecting the Konexx DPA to?