Cortelco network adaptor setup guide Data Port Anywhere Installation

Page 4

Data Port Anywhere Installation

Step 1. Connect the USB cable on the DPA to your computer USB port. The first time you connect the DPA to your computer, you will be prompted to install USB drivers, simply follow the prompts. The DPA uses standard Microsoft drivers. Follow the prompts to identify the DPA to your operating system.

Step 2. Remove the coiled handset cord from the telephone handset (2A) and insert it into the DPA jack labeled PHONE (2B).

2A

2B

Step 3. Connect your PC Card or internal modem cable to the DPA jack labeled MODEM.

The DPA is now installed and ready for use. If you choose to use the telephone handset for voice communications when your modem is not in use see next page.

Image 4

Contents Data Port Anywhere Why Data Port Anywhere DPA? Table of ContentsContacting Konexx Pre-Installation System Requirements Windows 98 or laterData Port Anywhere Installation Handset Windows Connection Setup To enter the x3 in Windows 98 Windows 2000 seeSelect Connection TAB To enter the x3 in Windows Page Establishing Your Connection Return the telephone handset in the cradle Locating a Host Modem Phone Number Windows For Windows 2000 see nextLocating a Host Modem Phone Number Windows Page Level Switch Settings Table See Listings for AvayaIBX SRX Level Switch Settings Table Operating Tips and Troubleshooting System Requirements FCC Requirements PartIndustry Canada IC Requirements FCC Warning StatementWarranty for Warranty/Registration Card see back panel What type of phones are you connecting the Konexx DPA to?