Chapter 8 Configuration on Various WAN Type
8.2Configuring Dynamic IP Connection
The Compex WP11A+ is
However, if your account requires a DHCP Client ID in order to release an IP address, you may need to configure the name of Compex WP11A+ with that of the DHCP Client ID issued by your ISP.
See the section on “System Identity” on Page 68, and remember to enter the DHCP Client ID issued by the ISP into the System Name field in the System Identity.
NOTE
If your computer is not able to resolve any web site, please verify that your DNS entry of the computer has been defined correctly.
8.2.1How to configure Singapore Cable Vision (SCV) Service
SCV provides a Dynamic IP address connection service. Assuming that your WP11A+ is not in the Dynamic IP setting, please follow the procedures to change to the appropriate WAN type.
1.Go to WAN Setup. Click on the “Change” button for list of other WAN types Selection.
2.On the list of other WAN types selection, check the radio button next to the Dynamic IP Address and click on the “Save” button.
Figure 8.2a Dynamic IP Address – for SCV broadband provider
Now, you can start surfing the Internet. You might want to manage the Internet access by setting Filtering rules etc. For details, please refer to “Packet Filtering” on Page 64.
46