CNET CIC-930W manual MPEG-4 Settings, Mjpeg Settings, Mobil Settings, Video Adjustment

Page 22

3. Make the required adjustments, as explained below, and save your changes.

MPEG-4 Settings

 

Resolution

Select the desired video resolution format. The default resolution is

 

 

 

set to 320*240.

 

 

 

 

 

Video Quality

Constant Bit Rate: Select the desired bit rate. The default is set

 

 

Control

to 1.2 Mbps.

 

 

Fixed Quality: Select the desired option. The default fix quality

 

 

is set to Normal.

 

 

 

 

 

Max. Frame Rate

Select the desired Maximum bandwidth for the video stream. Note

 

 

that you can specify EITHER the Bandwidth OR the Frame Rate,

 

 

not both. If the Bandwidth is defined, the frame rate will be adjusted

 

 

as necessary to achieve the specified frame rate.

 

 

The default values for bandwidth is Unlimited, which allows you to

 

 

specify the desired frame rate.

 

 

 

 

 

MJPEG Settings

 

 

 

Resolution

Select the desired video resolution format. The default resolution is

 

 

 

set to 320*240.

 

 

 

 

 

Fixed Video

Select the desired fix quality. The default fix quality is set to

 

Quality

Normal.

 

 

Max. Frame Rate

Select the desired Maximum bandwidth for the video stream. Note

 

 

that you can specify EITHER the Bandwidth OR the Frame Rate,

 

 

not both. If the Bandwidth is defined, the frame rate will be adjusted

 

 

as necessary to achieve the specified frame rate.

 

 

The default value for bandwidth is Unlimited, which allows you to

 

 

specify the desired frame rate.

 

 

 

 

 

Mobil Settings

 

 

 

Enable Mobil

Enable streaming video for the mobile device by checking this

 

 

Streaming

checkbox.

 

 

 

 

 

Resolution

The default resolution is set to 160x120.

 

 

 

 

Video Quality

Constant Bit Rate: Select the desired fix bit rate.

 

 

Control

Fixed Quality: Select the desired option. The default fix quality

 

 

is set to Normal.

 

 

 

 

 

Max. Frame Rate

Select the desired Maximum bandwidth for the video stream.

 

 

 

 

 

Access Code

Enter the code for accessing the live video from camera through cell

 

 

phone connection.

 

 

 

 

 

Video Adjustment

 

 

 

Power Line

Select the power line frequency (50Hz or 60Hz) used in your region,

 

 

Frequency

to improve the picture quality under florescent lighting.

 

 

White Balance

Select the desired option to match the current environment and

 

 

lighting.

 

 

 

 

 

Brightness

If necessary, you can adjust the brightness to obtain a better image.

 

 

For example, if the camera is facing a bright light, the image may be

 

 

too dark. In this case, you can increase the brightness.

 

 

 

 

 

 

19

Image 22
Contents CNet CIC-930W User’s Guide Table of Contents Network Camera Regulatory Approvals Copyright Notice Overview ProblemsRecording Video Overview Streaming Video/Audio through Internet CameraIntroduction FeaturesOverview Internet Features Security FeaturesWireless Features Front Network Camera Physical Details Network CameraRear Network Camera Package Contents Wireless Security Disabled Domain USA Channel No. Auto Basic SetupDefault Wireless settings are Mode Infrastructure System RequirementsAssemble the Camera Installation Network CameraPower Up Connect the LAN CableSetup using the Windows Wizard Setup ProcedurePassword Dialog Fixed or Dynamic IP Selection Save Settings Final Screen Viewing Live Video Connecting to a Camera on your LANRequirements Home Screen Examples using an IP address Connecting to a Camera via the InternetExample using a Domain Name When you connect, the following screen will be displayed Viewing Live Video General OptionsTo Adjust the Video Image Advanced Viewing SetupAdjusting the Video Image IntroductionMobil Settings MPEG-4 SettingsMjpeg Settings Video AdjustmentSpeaker SharpnessOptions Time StampTo Control User Access to Live Video Controlling User Access to the Video StreamAccess Router/Gateway Setup Making Video available from the InternetDdns Dynamic DNS Network Camera SetupHttp Port Configuration To use DdnsExample IP address Viewing Live Video Using your Web BrowserViewing Live Video via the Internet Example Domain NameViewing Live Video with the Viewing/Recording Utility Add CameraMotion Detection Alerts To Use Motion Detection AlertsPage Connecting using your Web Browser Connecting to Network CameraWeb-based Management Welcome Screen Administration Administration MenuSetup Video & AudioData System Screen System SettingsSystem Screen Date & TimeTime Zone You must Uncheck this checkbox when Daylight SavingAddress Update For daylight saving checkboxData Network Screen Network ScreenNetwork UPnP Multicast RTP/RTSPQoS Data Wireless Screen Wireless ScreenWireless Network Security WPA/WPA2 PersonalDdns Screen Data Ddns ScreenAccount/E-Mail Password/KeyCheck WAN IP Video & Audio Screen Data Video & Audion ScreenLighting Condition Video AdjustmentsAudio Type Flip MirrorUser Access Video Access ScreenData Video Access Screen Video AccessAdd New Schedule Existing Users User Database ScreenData User Database Screen User PropertiesData Motion Detection Screen Motion Detection ScreenMotion Detection Data E-Mail Screen Mail ScreenPrimary/Secondary Smtp Server Mail Address Mail SetupSubject Data FTP Screen FTP ScreenPrimary/Secondary FTP Data Http Screen Http ScreenHttp Notification Event Schedule Event Trigger ScreenData Event Trigger Screen New ScheduleActions Trigger EventInterval Attachment Type Jpeg ImageAdministrator Login Maintenance ScreenData Maintenance Screen Firmware UpgradeBackup & Restore Data Status Screen Status ScreenSystem Page Data Log Screen Log ScreenLog Windows InstallationMonitor/Playback/IP Recorder Utility System Tray Icon Main ScreenCamera Data LAN Camera SetupLocal ID Camera Name IP Address Port Number Login Setup Camera Pages Enable Trigger Event Camera Data Internet Adding Cameras on the InternetLocal ID Camera Name IP Address Port Number Login Stream Type Setup Camera Pages Enable Trigger Event Channel Camera Selection Alert Log ListPage Recording Video Recording ScheduleRecording Paths PreferencesData Preferences Instant Recording Time LimitDisk Allocation for Each Camera Recording Initial SettingsProxy Server Using Playback Searching Recorded Video FilesPage Troubleshooting ProblemsMotion detection feature doesnt send me any E-Mails SolutionSolution Problem 8 Solution Video quality may suddenly deteriorateRegulatory Approvals Appendix a SpecificationsNetwork Camera FCC StatementCE Approvals FCC Radiation Exposure StatementNetwork Camera copyright information No WarrantyCopyright Notice Package source codes LicenseThttpd.c tiny/turbo/throttling Http server Ntp-4.1.71 license Libupnp-1.2.1 LicenseCron license GNU General Public License PreamblePage Page No Warranty END of Terms and Conditions Lesser GNU General Public License GNU Lesser General Public LicensePage Page Page Page Page No Warranty Appendix B Streaming Video/Audio Solution Streaming Video/Audio through Internet CameraContact Information for CNet USA Tel Fax