2.2. Specifications
ITEM | CONTENTS |
|
|
Printing method | Line Thermal Dot Printing System | ||
Print speed | 50 mm / s (MAX) |
| |
Dot density | 8 Dots / mm (Vertical / Horizontal) | ||
Number of columns | Font A : 34 columns |
| |
| Font B : 46 columns |
| |
Character size | Font A : 1.25 mm x 3.00 mm (10 x 24 + 2 dot space) | ||
| Font B : 0.88 mm x 2.13 mm ( 7 x 17 +2 dot space) | ||
Character type | Alphanumeric, international characters | ||
Bar code type | |||
| CODE 39, CODE 128, CODABAR | ||
Line pitch | 4.23 mm (1/6 inch) | (Selectable by command) | |
Paper | Thermal Roll Paper | Paper Width : 58 mm Roll Diameter : Ø50 mm or less | |
Interface | Parallel (conforms to Centronics) or Serial (conforms to | ||
|
|
| (Selectable by dip switch) |
Input buffer | 4 K bytes |
|
|
Paper end detection | Equipped (Printer stops printing when roll paper runs out completely.) | ||
Equipped (Printer automatically feeds paper when paper sensor detects paper | |||
| in paper inlet.) |
| |
International Character | U.S.A., France, Germany, U.K., Denmark 1,2, Sweden, Italy, | ||
| Spain, Japan, Norway (Specified by command) | ||
Auto paper cutter | Printer automatically cuts paper by command. | ||
(Only | Partial cut (One tear point left) and Full cut are available by command. | ||
Supply voltage | 5V ± 5 % | ||
| 24 V ± 5 % | ||
|
|
| (Peak approx. 6 A) |
Operating environment | 5 - 40°C | 35 - 85 % RH (No condensation) | |
Storage environment | 10 - 90 % RH (No condensation) | ||
Outer dimension | 106 mm (W) x 109 mm(H) x 99 mm(D) | ||
Weight | Approx. 560 g (Main body) | ||
Safety standard | UL, CUL, TUV |
| |
|
| ||
EMI | FCC : Class A , VCC I: Class A | ||
| (These standards are applied only for the printer which is used with | ||
|
|
| our exclusive AC Adapter.) |
Reliability | Print head life : Pulse resistance 50 million pulse (printing ratio 12.5%) | ||
|
| Wear resistance 30 km (at normal temperature and humidity, | |
|
|
| with recommended paper) |
| Auto cutter life : 300,000 cuts | ||
CITIZEN | 13 |