(15)Specifying/canceling Double Printing (ESC G n) Code : [1B]h + [47]h + n
* {0 ≤ n ≤ FF} Data is described in Hex code. Specifying/canceling the double printing.
•"n" is valid only for the lowest bit (n0).
•Control by n is shown as follows.
n0 | Type |
0Canceling double printing.
1Specifying double printing.
•The print result of Double printing and highlight character printing is completely same
.
(16)Printing and feeding paper at minimum pitch (ESC J n) Code : [1B]h + [4A]h + n
* {0 ≤ n ≤ FF} Data is described in Hex code. Prints data inside the print buffer and feeds paper by n/360 inch.
•Specified volume does not remain.
•The beginning of the line is to be considered as the next printing start position.
•Initial value is not defined.
(17)Selecting International Characters (ESC R n)
Code : [1B]h + [52]h + n
* {0 ≤ n ≤ 0A) Data is described in Hex code.
Selecting international characters.
•Depending on the value of n, following character sets are specified.
n(Hex) | CHARACTER SET |
0 | U.S.A. |
1 | France |
2 | Germany |
3 | U.K. |
4 | Denmark 1 |
5 | Sweden |
6 | Italy |
7 | Spain |
8 | Japan |
9 | Norway |
10 | Denmark 2 |
•The initial value of n indicates the character set specified by Jumper setting (J1 - J3).
(18)NOP (ESC c3)
(19)NOP (ESC c5)
CITIZEN | 37 |