Citizen Systems CBM-291 user manual Command Details, Value BIT Function

Page 33

8.2 Command Details

(1)Horizontal Tab Command (HT) Code : (09)h

Shifts the printing position to the next horizontal tab position. The horizontal tab position is set

by ESC D. Initial setting of the horizontal tab position is each 8 characters in 9th, 17th, 25th, 33rd, columns.

(2)Print Command (CR)

Code : (0D)h

1)When DS 1 -2 is OFF: This command is ignored.

2)When DS 1- 2 is ON:

With data held inside the internal print buffer, printing and line feed are performed.

Without data inside the internal print buffer, however, no printing is performed.

(3)Printing and Paper Feed Command (LF) Code : (0A)h

Prints data inside the input buffer and feeds lines based on the line feed amount having been set.

(4)Setting the right space amount of the characters (ESC SP n)

Code : (1B)h + (20)h + n

* {0 ≤ n ≤ 20} Data is described in Hex code.

The rightward space amount is set in dot unit (1/203 inch unit). In the initial value, it is n=0. The rightward space amount in double wide mode is made double of the set volume.

(5)Collective Specifying Printing Mode (ESC ! n) Code: (1B)h + (21)h + n

 

* {0 ≤ n ≤ FF}

Data is described in Hex code.

 

Printing mode is assigned.

Each n bit indicates the following:

 

 

 

 

 

VALUE

 

 

BIT

FUNCTION

0

 

1

 

0

Character Font

Font A

 

Font B

 

1

Undefined

 

 

 

 

 

2

Undefined

 

 

 

 

 

3

High-lighting

Canceled

 

Specified

 

4

Double height

Canceled

 

Specified

 

5

Double width

Canceled

 

Specified

 

6

Undefined

 

 

 

 

 

7

Underline

 

Canceled

 

Specified

With double height and double width being specified simultaneously, double wide and double high characters are consisted.

An underline is attached to the full character width, which, however, is not attached to the part having been skipped by the horizontal tab. Neither is it attached to 90°-right-turned characters.

The underline width is as having been specified by <ESC - >. (The default setting is 1 dot width. )

In case that double wide character and normal character exist in same one line, the layout of underline is consistent one.

CITIZEN

33

Image 33
Contents User’s Manual Important safety instruction Citizen Citizen Citizen Precautions for installation Citizen Ordinary Maintenance Contents Date configuration Features OutlinePackage Model classifications Basic SpecificationsContents SpecificationsCode 39, Code 128, Codabar UL, CUL, TUV EMIPrinting position Position of printer head and auto cutter Specifications of Roll paper Recommended paperSpecified Power Supply Citizen Rack mounting OperationConnecting a cable for power supply and interface Paper feeding Opening/closing front coverAuto paper loading function Setting roll paperRemoving paper jam and canceling cutter lock PE and Mechanical alarmSelf print function Citizen Dip switch setting Connecting connector Function of each connector pinsError Precautions Explanation of input / output signalsParallel Interface Electrical characteristics Timing chart Data receiving controlBuffering Serial Interface Explanation of Input / Output signals Error detection Date configurationRXD Print Control Function Command LitControl Function Code NOPValue BIT Function Command DetailsExample Vertical Direction Horizontal Direction Mode NO. of Dots DOT DensityCitizen Character SET Drawer kick No pin BIT Function ValueSpecifying inverted characters UPC-A UPC-E JAN13 EAN JAN 8 EAN Code ITF Codabar NW-7 Citizen Mode Name DOT Density Position Citizen International Character TableInternational Character Code Table Appendix 1. Block Diagram Appendix 2. Outer Appearance