Citizen Systems CBM-750, CBM-730 manual CBM-710 CBM-720

Page 10

CBM-710/720/730/750 User ’s Manual

		Item	CBM-710, 730		CBM-720, 750
12	Validation Print		Available only for V-Type (1 line print)

13	Auto cutter		Without cutter		With cutter Partial cut/Full cut*3

14	Cassette ribbon		Two color (Black and Red) print IR-61R/B*4

15	Paper winder		Model AW-2 available as option.

	Power voltage*5		100V ± 10%, 50/60 Hz (For Japan)
16			115V ± 10%. 60 Hz (For United States)
			230V ± 10%, 50/60Hz (For Europe)

17	Power consump.		Approx. 30W

18	Operation temp. & humidity		5° to 35°C / 41° to 95°F
			10% to 85% RH


19	Storage temp.		-20° to 70°C

20	Net weight		Approx. 3.1 kg (710)		Approx. 3.3 kg (720)
			Approx. 3.3 kg (730)		Approx. 3.6 kg (750)


21	External dimensions		Refer to Section 14.

Notes:	*l	Paper weight of 45 kg refers to 1,000 sheets of 788 ⋅ 1,091 mm.
	*2	RS-422A interface specifications are not included in this manual

1.With the RS422A type interface, only a one line input buffer can l selected.

2.However, when the input buffer is set for two lines, back -up of graph data is not possible. *3 Partial cut is three connecting points remaining. Full cut is one connecting point remaining. *4 Single color print ribbon is available as option.

Black print:	IR-61B
Purple print:	IR-61P

V Type: Use only single color print ribbon.

*5 Power voltage setting is performed at the factory.

4

CITIZEN

Image 10

Contents Page Declaration of Conformity Important Safety Instructions Sicherheitshinweis Contents 11.1 Accessories Features Introduction Type Classifications CBM-710 23 RSpecifications General SpecificationsCBM-710 CBM-720 Paper Specifications Print FormatBlock Diagram External Appearance and Pars Descriptions CBM-710 External AppearanceCBM-720 External Appearance Front ViewCBM-730 External Appearance CBM-750 External Appearance Part Descriptions Setting and Removing the Paper and Ribbon Covers OperationOpening and Closing the Cutter Unit CBM-720. CBM-750 Installing the Cassette Ribbon Installing and Changing the Paper Installing the PaperCitizen Citizen Paper End Detector Procedures for Actuating the Self Print FunctionSelf Print Function Changing the PaperInstallation of the CBM-750 Input Buffer Back-up Input Buffer BACK-UP FunctionClearing the Input Buffer Connector Pin Assignment SpecificationsParallel Interface Description of Input/Output Signals Input/Output SignalsElectrical Characteristics Timing Chart Serial Interface DTR Description of Input/Output Signals Error Detection Data CompositionData Receiving Control BufferingOutput DTR, TD Ready Setting DIP Switch DS1 Function SelectionDIP Switch DS2 Serial interface specifications only Slide Switch Setting Serial interface specifications only DIP Switch and Slide Switch LocationsPrint Control Functions Control CodesEnlarged character command Input Data FormatsPrint command Enlarged character cancel commandPaper feed command Clear commandInverted character command Initial Set CommandBuzzer Command Underline Command Graphic Command Graphic Type Only14 2/9 inch Line Feed Pitch Set Command Graphic Type 13 1/9 inch Line Feed Pitch Set Command Graphic TypePin Form Feed Command Skip Perforation Cancel Command 2nd byte 4EH 3rd byte N7 N6 N5 N4 N3 N2 N1 Binary digitalFull Cut Command 1st byte Character Code Tables International Character CodesIndividual Country Character Codes Exterior MaintenanceMaintenance Procedures InteriorExternal Dimensions CBM-710CBM-720 Paper Winder Unit AW-2 CBM-730 CBM-750 Information Systems Division Head Office