Citizen Systems CBM-910 manual emulation

In 3110 emulation

1 2 3 4 5 6 7

0

1

2

3

4

5

6

7

1

2

*

*

3

4

*

*

5

6

*

*

7

41H 22H 55H 08H 41H 00H 41H

As this printer takes half-dot printing system, dots cannot be aligned continuously in printing (horizontal) direction. Therefore, even if any pattern is specified at point “*” at the right of point “●” above, it cannot be registered as a pattern.

Configuring a double width character by registering the data for 2 characters is also possible.

<Example> When registering a Japanese character “” by using two characters 41H and 42H

1 2 3 4 5

6 7 8 9 1 2 3 4 5 6 7 8 9

41H

42H

Following ESC + & + 01 (Note) + 41H + 42H

sending data 80H, 00H, 81H, 00H, 89H, 00H, 89H, 00H, FFH 00H, 89H, 00H, A9H, 40H, 81H, 00H, 80H, 00H

allows “” to be registered at 41H and 42H.

[Printing registered character]

To print a registered character, executing Activate Registered Character command (ESC + “%” + 1) may be required in some case. If you want to return to the internal characters, it is necessary to disable the registered characters. Refer to the description for Valid/Invalid of Registered Characters command.

Note: With 0 being set in “C1” parameter even if data have been registered in the uppermost position, letter image registered is made incomplete.

— 42 —