Citizen Systems PD-04C user manual Self-Test Print

The Self-Test Print

Before operating the self-test print, make sure that the printer is set to OFF and set the DIP switch No.1 (see P.22) located on the bottom of the printer to ON. After the self- test print is finihed, set the DIP switch No.1 back to OFF.

1ASCII Slide Print

Insert paper. With the paper depress lever up (released), press the paper feed button and hold it down while turning on the power. The Self-Test Print mode is engaged, by putting down the paper depress lever,

*the Program version

*the ASCII slide

will automatically be printed.

2Built-in Font Print

Insert paper. With the paper depress lever down (engaged), press the paper feed button and hold it down while turning on the power. After a few seconds, the printer will enter the auto test print mode.

*the Program version

*the built-in font

will automatically be printed.

– 30 –