Installation of the Paper
This printer uses thermal print paper, and not an ink ribbon. There are four ways to insert paper into the printer depending on the paper, the paper course and the roll paper holder.
1Inserting paper from the Rear.
2Feeding Single Sheets From the Top
3Using the roll paper holder
4Feeding sheets from the Bottom
Inserting Paper from the Rear.
1 Turn the printer on.
[If the paper depress lever is up,
please put it in the down position.
[ The error lamp will be blinking at this time
2Place the edge of the paper straight
forward into the insert slot.
[ As in the illustration on the right, push
the paper into the slot until it stops against the inner apparatus (push until the error lamp stops blinking and turns off).
In just a few seconds the paper will automatically feed in and the printer will enter the ready to print mode.
3When the paper is inserted a little crookedly.
[ Pull up the paper depress lever and press down the feed button until the paper straightens.
– 13 –