Feeding Sheets from the Bottom
1Turn the printer on.
[ Paper Depress Lever is up.
[ The error lamp will turn on.
2Place the end of the paper into the
bottom insertion path.
[As seen in the illustration to the right, push the paper through the printer until it comes out of the top side. (The error message lamp changes from 'on' to 'flashing')
[After you have inserted the paper put
the Paper Depress Lever down. (The error lamp stops flashing.)
Note: If the paper is crooked, pull the Paper Depress Lever up to release the paper and straighten.
– 16 –