Operation Panel
POWER LED | ERROR LED |
| |
| FEED button |
●POWER LED
Illuminated when the printer power is on and off when the printer power is off. May blink or light in a special mode or in case of failure.
●ERROR LED
Illuminated or blinks when paper is empty or in case of failure. The interval length of blinking represents the type of error.
●FEED button
Pressing this button once causes the paper to feed one line. The longer the button is pressed, the more paper is fed.
Pressing this button causes the paper to feed to the next Black Mark position
in Black Mark mode.
See 5.3 Manual Setting of Memory Switch
In case of auto cutter error, press the FEED button after removing the cause of the error.
Rear Connectors
Interface connector (Serial, parallel, etc.)
Power connector |
|
|
(DC power supply type) |
|
|
AC inlet | Interface board | USB connector |
(AC power type) | mounting screws |
|
●Interface connector (Serial, parallel, etc.)
Connects to the interface cable. A DIP switch is provided on the serial interface board.
●Cash drawer
Connects to the cable from the cash drawer.
●AC inlet (AC power type) Connects to AC power cord
●Power connector (DC power supply type) Connects to the cable from a cash register.
— 13 —