Citizen Systems CT-S4000DC user manual Printer failure or breakage may occur

Page 9

CAUTION

Caution label is attached on the position shown in the following figure. Carefully read the precautions in handling before using the printer.

THIS LABEL INDICATES THE RISK OF ANY INJURY DUE TO “HIGH TEMPERATURE” OF THE PRINT HEAD.

Do not transport this printer with the paper roll inside.

• Printer failure or breakage may occur.

To prevent possible malfunction or failure observe the following.

Avoid operating the printer without paper properly loaded.

Avoid the use of paper not complying with specifications.

• May result in poor print quality.

Avoid using torn pieces of paper or spliced with plastic adhesive

tapes.

■ Avoid forcibly pulling already loaded paper by hand. ■ Avoid wedging the paper into the printer.

May jam paper. To release, refer to “Removing Jammed Paper” in this manual.

Avoid using a sharp pointed device to operate panel keys.

Be sure to firmly insert the cable plug into its mating socket.

A cross connection may damage the printer’s internal electronics or the host system’s hardware.

Only use the printer with devices that have designated solenoid specifications for the cash drawer interface connector.

• Neglecting this caution may result in malfunction or failure.

— 6 —

Image 9
Contents Line Thermal Printer Weee Mark Sicherheitshinweis For Uses in CanadaPour L’utilisateurs Canadiens General Precautions Safety Precautions ... Which should be Strictly Observed Precautions on Printer Installation Malfunction, failure, or electric shock may result If leakage occurs electric shock may resultGas explosion could result Precautions in Handling the Printer May result in poor print quality Printer failure or breakage may occurDaily Maintenance Table of Contents General Outline FeaturesModel Classification UnpackingSpecifications Basic SpecificationsExplanation of Printer Parts Printer AppearanceOperation panel Operation Panel Other Built-in Functions Printer Cover InsidePreparation Connecting the AC Power CordConnecting Interface Cables Signal PinPin Signal Signal Function Connecting the Cash DrawerInstalling the Printer Confirm that the power switch is OFF Open the printer coverPartition for Paper Roll Switch No Function Setting DIP SwitchSettings Baud Rate bps Switch NoAdjusting the Paper Near-end Sensor Removing Jammed Paper Setting/Replacing the paper rollPull the cover open button forward Open the printer cover Firmly close the printer cover until a click can be heardSelf-printing Cleaning the Print HeadHexadecimal Dump Printing Error IndicationWhen the Paper Cover Cannot Be Opened StatusBuzzer Other External Views and DimensionsPrinting Paper Paper Type Product NameSwitch No Setting OFF Manual Setting of Memory SwitchDTR/DSR, XON/XOFF Switch No Setting Default Set ValuesPower on Info Valid
Related manuals
Manual 160 pages 39.38 Kb