Citizen Systems CT-S4000DC user manual Printer Cover Inside, Other Built-in Functions

Page 17
See 4.6 Error Indication

2.2 Printer Cover Inside

● Paper feed roller

Feeds paper as part of print

mechanism.

Paper-near-end sensor

Detects near paper end, change

Paper feed roller

Paper-end sensor

position in accordance with the

outer diameter of paper core.

● Auto cutter

Cuts the paper with a command

at the end of printing. Cutting

method is selectable between

partial cut and full cut with a

command.

*Factory default of the memory SW4-8 is set to "Partial cut", so that a command will be ignored.

Manual cutter

Tears the paper by hand.

Print (thermal) head

Prints characters and/or graphic data on thermal paper.

Paper-end sensor

Stops printing when this sensor detects paper end.

Print (thermal) head

Auto cutter

Manual cutter

Paper-near-end sensor

2.3 Other Built-in Functions

● Buzzer

This printer has a built-in buzzer. It is operated in case of an error, operation, or by a command.

User memory

Allows downloading of user-defined characters and logo data in the nonvolatile memory. This data remains stored even after the printer power is off. For the registration method, refer to Command Reference Manual in separate document. To acquire the Command Reference Manual, contact your Citizen Systems dealer.

Memory switch

Setting of various kinds of functions can be stored in nonvolatile memory. The functions are valid even if the printer power is turned off.

— 14 —

Image 17
Contents Line Thermal Printer Weee Mark Pour L’utilisateurs Canadiens SicherheitshinweisFor Uses in Canada General Precautions Safety Precautions ... Which should be Strictly Observed Precautions on Printer Installation Gas explosion could result Malfunction, failure, or electric shock may resultIf leakage occurs electric shock may result Precautions in Handling the Printer May result in poor print quality Printer failure or breakage may occurDaily Maintenance Table of Contents General Outline FeaturesModel Classification UnpackingSpecifications Basic SpecificationsOperation panel Explanation of Printer PartsPrinter Appearance Operation Panel Other Built-in Functions Printer Cover InsidePreparation Connecting the AC Power CordPin Signal Connecting Interface CablesSignal Pin Signal Function Connecting the Cash DrawerPartition for Paper Roll Installing the PrinterConfirm that the power switch is OFF Open the printer cover Switch No Function Setting DIP SwitchSettings Baud Rate bps Switch NoAdjusting the Paper Near-end Sensor Removing Jammed Paper Setting/Replacing the paper rollPull the cover open button forward Open the printer cover Firmly close the printer cover until a click can be heardSelf-printing Cleaning the Print HeadHexadecimal Dump Printing Error IndicationBuzzer When the Paper Cover Cannot Be OpenedStatus Other External Views and DimensionsPrinting Paper Paper Type Product NameSwitch No Setting OFF Manual Setting of Memory SwitchDTR/DSR, XON/XOFF Switch No Setting Default Set ValuesPower on Info Valid
Related manuals
Manual 160 pages 39.38 Kb