Citizen Systems CT-S4000DC user manual Precautions on Printer Installation

Page 6

PRECAUTIONS ON PRINTER INSTALLATION

WARNING

■ Do not use or store this product in a place where it will be exposed to:

* Flames or moist air. * Direct sunlight.

*Hot airflow or radiation from a heating device.

*Salty air or corrosive gases.

*Ill-ventilated atmosphere.

*Chemical reactions in a laboratory.

*Airborne oil, steel particles, or dust.

*Static electricity or strong magnetic field.

Neglecting these warnings may result in printer failure, overheating, emission of smoke, fire, or electric shock.

Do not drop any foreign object nor spill liquid into the printer. Do not

place any object on the printer either.

Do not drop any metallic object such as paper clip, pin or screw into the printer.

Do not place a flower vase, pot or cup containing water on the printer.

Do not spill coffee, soft drinks or any other liquid into the printer.

Do not spray insecticide or any other chemical liquid over the printer.

• A metallic foreign object, if accidentally dropped into the printer, may cause printer failure, fire, or electric shock. Should it occur,

immediately turn the printer off, unplug it from the supply outlet, and call your local Citizen Systems dealer.

Do not handle the printer in the following ways:

Do not allow the printer to sustain strong impacts or hard jolts (e.g.,

trampling, dropping, striking with a hard edge).

Never attempt to disassemble or modify the printer.

• Neglecting to handle properly may result in printer failure, overheating, emission of smoke, fire, or electric shock.

Install, use, or store the printer out of the reach of children.

• Electric appliances could cause an unexpected injury or accident if they are handled or used improperly.

• Keep the power cord and signal cables out of the reach of children. Also children should not be allowed to gain access to any internal part of the printer.

The plastic bag the printer came in must be disposed of properly or kept away from children. Wearing it over the head may lead to suffocation.

— 3 —

Image 6
Contents Line Thermal Printer Weee Mark Sicherheitshinweis For Uses in CanadaPour L’utilisateurs Canadiens General Precautions Safety Precautions ... Which should be Strictly Observed Precautions on Printer Installation Malfunction, failure, or electric shock may result If leakage occurs electric shock may resultGas explosion could result Precautions in Handling the Printer Printer failure or breakage may occur May result in poor print qualityDaily Maintenance Table of Contents Features General OutlineUnpacking Model ClassificationBasic Specifications SpecificationsExplanation of Printer Parts Printer AppearanceOperation panel Operation Panel Printer Cover Inside Other Built-in FunctionsConnecting the AC Power Cord PreparationConnecting Interface Cables Signal PinPin Signal Connecting the Cash Drawer Signal FunctionInstalling the Printer Confirm that the power switch is OFF Open the printer coverPartition for Paper Roll Settings Setting DIP SwitchSwitch No Function Baud Rate bps Switch NoAdjusting the Paper Near-end Sensor Pull the cover open button forward Open the printer cover Setting/Replacing the paper rollRemoving Jammed Paper Firmly close the printer cover until a click can be heardCleaning the Print Head Self-printingError Indication Hexadecimal Dump PrintingWhen the Paper Cover Cannot Be Opened StatusBuzzer Printing Paper External Views and DimensionsOther Paper Type Product NameManual Setting of Memory Switch Switch No Setting OFFSwitch No Setting Default Set Values DTR/DSR, XON/XOFFPower on Info Valid
Related manuals
Manual 160 pages 39.38 Kb