BT BT 1800HG quick start Connection Method Reference, Reference Method Connection

I]ZhZg^VacjbWZgVcY+)"W^i L:EZcXgnei^dc`Znndjl^aa cZZY[dgi]^hXdc[^\jgVi^dc^h adXViZYVii]ZWdiidbd[ndjg \ViZlVn#

7I<gZZc

MAC

Connection Method Reference

Ethernet

•  With your computer switched off, connect the yellow Ethernet cable provided from your computer’s Ethernet socket to any available LOCAL ETHERNET socket on the Intelligent Gateway. If you do not have an Ethernet socket on your computer, you will need to install an Ethernet adapter in to your Mac, following the manufacturer’s instructions.

•  Connect the AC power adapter provided from the Intelligent Gateway’s POWER port to an electrical outlet.

•  Switch-on your computer.

USB

•  With your computer switched off, connect the blue USB cable provided from your computer’s USB socket to the USB socket on the Intelligent Gateway.

•  Connect the provided AC power adapter from the Intelligent Gateway’s POWER port to an electrical outlet.

•  Switch-on your computer.

Installing USB Drivers on a Mac

Note: USB drivers are available for OS 8.6 to 9.X and OS 10.2 only. If a window opens asking if you ‘would like to load the driver over the internet’, click ‘cancel’.

7I&-%%=< >ciZaa^\Zci<ViZlVn

7I&-%%=< >ciZaa^\Zci<ViZlVn

		.instructions configuration detailed for
Guide Support Product the of section Adapters’ Wireless Broadband Business BT ‘Installing
	the to Refer .Gateway Intelligent your with communicate
,+*)('&%R-.P		to adapter wireless the configure now must You	•
&%.-HC/%&'()*+,	\ViZlVn#
adXViZY    		.instructions manufacturer’s
cZZY^h  
L:E   
I]Z   		to according adapter wireless your Install	•
		Wireless
	idXVcXZa#	>[i]Z      
		ME 
		.drive’ ROM-‘CD
		check and drive’ Disk ‘Floppy uncheck drivers’,
		for search to where ‘identify to prompted If
	.settings default recommended the selecting instructions
	screen-on the follow displays’, Wizard Hardware ‘Add the If		•
>ciZaa^\Zci<ViZlVn		PC a on Drivers USB Installing
%%=<	-7I&
		.computer your on Switch	•
		.outlet electrical an to port POWER Gateway’s
	Intelligent the from adapter power AC provided the Connect		•
		.Gateway Intelligent the on
	socket USB the to socket USB computer’s your from provided

•  Double-click on the ‘2Wire USB’ folder on the CD. Double-click the ‘2Wire USB’ icon inside the folder and click ‘Continue’.

•  Accept the License Agreement and click ‘Accept’ to continue your installation. Selecting ‘Decline’ will end your installation.

•  Select ‘Easy Install’ and click ‘Install’. When prompted, restart your computer.

		cable USB blue the connect off, switched computer your With	•
		USB
>ciZaa^\Zci<ViZlVn		.computer your on Switch	•
%%=<	-7I&	.outlet electrical an to port POWER Gateway’s
		Intelligent the from provided adapter power AC the Connect	•

Wireless

•  Install your wireless adapter according to manufacturer’s instructions.

•  You must now configure the wireless adapter to communicate with your Intelligent Gateway. Refer to the ‘Installing BT Business Broadband Wireless Adapters’

section of the Product Support Guide for detailed configuration instructions.

HC/%&'()*+,-.&%

P.-,+*)('&%R

.instructions manufacturer’s
the following PC, your to in adapter Ethernet an install to need
will you computer, your on socket Ethernet an have not do you If
.Gateway Intelligent the on socket ETHERNET LOCAL available
any to socket Ethernet computer’s your from provided cable
Ethernet yellow the connect off, switched computer your With	•
Ethernet
Reference Method Connection
PC
I7ajZ 

4

BP-25926 8PP.indd 7-8 16/9/05 16:06:12

5