Beaumont Products MPEG - 1, MPEG - 4, MPEG - 2 manual Stream Type Entries, Multicast MPEG-4

V B R I C K E T H E R N E T V S E T T O P B O X U S E R S G U I D E V E R S I O N 3 . 6 . 9

Stream Type Entries

Enter a corresponding address in the form:

Multicast MPEG-1	group:port
Multicast MPEG-2	group:port
Multicast MPEG-4	(a) See following section for information
	on how to FTP the SDP file to the
	SET TOP BOX
	/wfs/<path to file>
RTSP MPEG-1 for Video on Demand (EtherneTV VOD)	<ipaddr>/program
RTSP MPEG-2 for Video on Demand (EtherneTV VOD)	<ipaddr>/program
RTSP MPEG-4 Internet Streaming Media Alliance (ISMA)	<ipaddr>/program

NOTE: It is possible to use a hostname or numeric IP address wherever an <ipaddr> is called for (only if the hostname is in the DNS server).

To watch the programmed channel, use the IR remote control unit to Watch TV c and use the left button to select.

Multicast MPEG-4

To decode multicast MPEG-4 in Local or Local-Fullscreen modes, it is necessary to put an SDP file on the set top box. This can be done through the set top box internal FTP server.

￿First, obtain an SDP file for the MPEG-4 multicast stream. When streaming from VBXcast, see the instructions on page 23 of the VBXcast Supplement Version 3.0.0 on SDP files.

￿Use an FTP client to place the SDP file on the set top box. A sample FTP session to use an set top box with the IP address of 172.22.117.70 would be:

NOTE: Prompts are in bold.

C:\> ftp 172.22.117.70

User (172.22.117.70:(none)): root

331 Password required for root. Password: admin

230 User root logged in ftp> bin

200 Type set to I. ftp> cd wfs

250 CWD command successful. ftp> put vbs1d1

200 PORT command successful.

150 Opening BINARY mode data connection for vbs1d1.

226 Transfer complete.

ftp: 739 bytes sent in 0.12 Seconds ftp> bye

...

C:\>

C O P Y R I G H T V B R I C K S Y S T E M S P A G E 2 1 N O V E M B E R 1 0 , 2 0 0 3