Audio Pro 8R manual Input Channels, Output Channels

Page 13

Fast Track Ultra 8R

User Guide

12

Input Channels

The first eight channels on each of the Monitor pages correspond to the eight analog inputs. Inputs 7 and 8 are switchable between the analog inputs and the S/PDIF digital inputs, via the Sync Source drop-down menu in the Control Panel. When the sync source is set to “External,” input channels 7 and 8 receive their signal from the S/PDIF input. The next eight channels are returns from your DAW application software. Any of these 16 channels can be sent to any of eight possible output busses by selecting the Monitor tab for the desired output pair and setting the levels for the input and software return channels respectively.

Each channel provides the following:

<Level meter – monitors the channel’s input level

<Pan control – sets the position of the signal within the left and right output channel pair

<Solo button – solos that channel’s output signal in the output channels

<Mute button – mutes that channel’s output signal to the output channels

<Link button – links a pair of channels together. When the Link button is active, changes made to one channel affect the adjacent (linked) channel as well.

<Level fader – controls the level of that channel’s signal sent to the output channels.

<Send control – controls the level of that channel’s signal sent to the internal DSP effects.

NOTE: Only Monitor outputs 1/2, and 3/4 and can utilize the Fast Track Ultra 8R’s internal DSP. Therefore the Monitor mixer tabs for outputs 5/6 and 7/8 do not provide Send controls.

IMPORTANT: Note that changes made to the monitoring mix are completely independent from, and do not affect signals being recorded to your DAW.

Output Channels

The right side of each Monitor tab provides level meters and faders for its corresponding stereo pair of outputs. Each Monitor tab’s output faders control the output level sent to that pair of hardware outputs.

The Monitor tabs correspond to each pair of hardware Line outputs 19 . Monitor outputs 7 and 8 are duplicated at the analog Line Outputs 19 and the S/PDIF digital output 18 .

Between the sixteen channel inputs and the two channel outputs is a Bypass button. Activating this button will bypass the internal DSP effects, allowing you to monitor the signal without effects.

NOTE: Only Monitor outputs 1/2 and 3/4 can utilize the Fast Track Ultra 8R’s internal DSP. Therefore the Monitor mixer tabs for outputs 5/6 and 7/8 do not provide Bypass buttons.

Image 13
Contents User Guide What’s in the Box IntroductionFast Track Ultra 8R Features Windows Minimum System RequirementsMac OS Minimum System RequirementsFront Panel Controls and ConnectorsAbout Insert Cables Rear PanelHardware Connections Installing Fast Track Ultra 8RSetting Your Recording Levels Using Fast Track Ultra 8RSetting the Sample Rate Using the Mic, Line or Instrument InputsMonitor Mixing Software Output Signal RoutingUser Guide Software Control Panel Each tab controls a separate pair of outputs Monitor TabsOutput Channels Input ChannelsSample Rate Settings Settings TabExternal Signal Status High Performance Mode Windows only Driver Settings ASIO/WDM Buffer Size Windows onlySync Source Asio Direct Monitoring Windows onlyEffects Algorithm Presets Effects SettingsSaving and Recalling Settings Metering and Knob Control OptionsFlow Tab Meters TabAbout Tab About Overdub Recording and Monitor Mixing Using the Monitor MixerWhy use effects in a monitor mix? Midi Troubleshooting Line Outputs SpecificationsWarranty Terms Warranty Registration Warranty Terms and RegistrationBenelux