Panasonic AJ-D250P $ Audio control commands, $ Counter control commands, Parameters

RS-232C

$Audio control commands

Sends data of computer	Return data from VTR	Description of command
[STX] AOC:m [ETX]	[STX] AOC [ETX]	Sets the audio signal output channel/s. Playback output is
Parameters		possible for CH3 and CH4 when audio signals for 4
m = 1: CH1		channels have been recorded on a DV format tape.
2: CH2		<Note>
3: CH3		This command is ignored while a search control command
4: CH4		is being processed.
5: CH1 & CH2
6: CH3 & CH4
7: CH1+3 & CH2+4

$Counter control commands

Sends data of computer			Return data from VTR		Description of command
	[STX] CCP:data [ETX]		[STX] CCP [ETX]	Presets the designated counter value on the CTL counter.
Parameters				The value will be corrected as follows if the non-drop frame
data = ghmmssff				preset value has been set while the drop frame mode is
g = Blank: With a positive value				established.
– sign: With a negative value				00:01:00:00	00:00:59:28
h =	0	9: Hours		00:01:00:01	00:00:59:29
mm = 00		59: Minutes		<Note>
ss =	00	59: Seconds		This command is ignored while a search control command
ff =	00	29: Frames		is being processed or while the tape is being ejected.
	[STX] CDF [ETX]		[STX] CDF [ETX]	Disables the drop frame mode setting.
				CTL and the time code are set to the non-drop frame mode.
				The non-drop frame is enabled for the time code when it is
				being recorded.
				<Note>
				This command is ignored while a search control command
				is being processed, during recording and in the INSERT
				mode.
	[STX] CDN [ETX]		[STX] CDN [ETX]	Enables the drop frame mode setting.
				CTL and the time code are set to the drop frame mode.
				The drop frame is enabled for the time code when it is being
				recorded.
				<Note>
				This command is ignored while a search control command
				is being processed, during recording and in the INSERT
				mode.
	[STX] CHM:m [ETX]		[STX] CHM [ETX]	Sets the CTL display to the 12-hour mode or 24-hour mode.
Parameters				<Note>
m = 1:	12-hour mode			This command is ignored while a search control command
2:	24-hour mode			is being processed.

47