Panasonic AJ-D250P Setting the time code, Setting the user’s bit, Down button Stop button

Time Codes and User’s Bit

Setting the time code

1

2

Set the unit to the menu mode (by setting the LOCAL/MENU/REMOTE switch to the MENU position).

Select the “TC PRESET” setup menu item, and press the DATA+ button (PAUSE/STILL button) or DATA– button (PLAY button).

(See page 32)

3	Select the digit to be changed (blinking display) using the UP button (FF button) or
	DOWN button (STOP button).
4	The value is incremented or decremented using the DATA+ button (PAUSE/STILL
	button) or DATA– button (PLAY button).
5	Press the SET button (REC button) upon completion of the settings.
6	Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position.

<Notes>

OThe current time code value appears as the default value.

OWhen the RESET button is pressed while the digit to be changed is blinking, the display is reset to “00:00:00:00.”

OThe time code cannot be set unless P-REC or P-FREE has been selected as the “TC MODE” setup menu item setting. (See page 32)

OIf the MODE button (REW button) is pressed instead of the SET button while the digit to be changed is blinking, the time code setting will be canceled.

Setting the user’s bit

1

2

Set the unit to the menu mode (by setting the LOCAL/MENU/REMOTE switch to the MENU position).

Select the UB PRESET setup menu item, and press the DATA+ button (PAUSE/STILL button) or DATA– button (PLAY button).

(See page 32)

Now follow the same procedure as for setting the time code.

19