Panasonic AJ-D250P operating instructions Operation menu

Setup Menus

OPERATION menu

	Item		Setting
							Description of setting
No.	Superimposed	No.	Superimposed
	display		display
100	LOCAL ENABLE						For selecting the switches which can be operated on the front panel in the
							REMOTE mode.
		0000		DIS			0: None of the switches can be operated.
		0001	ST&EJ				1: Only the STOP switch and EJECT switch can be operated.
101	TAPE TIMER						For selecting the CTL counter display.
		0000		12H			0: ±12-hour display
		0001		24H			1: 24-hour display
102	S/F/R EE SEL						For selecting the EE or VV output in the STOP, FF or REW mode.
		0000				EE	0: E-E (electric modulation to electric playback) is output.
		0001	TAPE				1: V-V (VTR to VTR recording) is output.
103	WIDE MODE						For selecting the WIDE mode.
		0000	AUTO				0: The mode is detected automatically.
		0001	WIDE				1: The mode is forcibly treated as WIDE.
		0002	NORMAL				2: The mode is forcibly treated as NORMAL.
104	TAPE IN MOD						For selecting the operation which is to be performed when the cassette has
							been inserted into the unit.
		0000	STOP				0: STOP
		0001	REW				1: REWIND
		0002	PAUSE				2: PLAY PAUSE
		0003	PLAY				3: PLAY
105	TAPE END MOD						For selecting the operation which is to be performed when the tape has
							arrived at the end.
		0000	STOP				0: STOP
		0001	REW				1: REWIND
		0002	REW EJ				2: The tape is rewound and, upon completion of rewinding, it is ejected.
		0003	EJECT				3: EJECT
106	AUTO BACK						For selecting whether the tape is be automatically rolled back in order to
							ensure frame to frame continuity.
		0000		OFF			0: The tape is not automatically rolled back.
		0001			ON		1: The tape is automatically rolled back.
107	FORMAT SEL						For selecting the format when an L cassette is to be used.
		0000	DVCPRO				0: DVCPRO mode
		0001				DV	1: DV mode
		0002	DVCAM				2: DVCAM mode
108	REC INHIBIT						For selecting whether to inhibit recording on the unit.
		0000		OFF			0: Recording is allowed.
		0001			ON		1: Recording is inhibited.
109	CAP. LOCK						For selecting the capstan lock mode.
		0000				2F	0: The 2F lock mode is selected for the capstan.
		0001				4F	1: The 4F lock mode is selected for the capstan.
110	FF. REW MAX						For setting the maximum FF and REW speed.
		0000		X32			0: 32 times normal tape speed
		0001		X60			1: 60 times normal tape speed
111	MEMORY MODE						For setting the memory operation.
		0000		OFF			0: The memory operation is not performed.
		0001	M-STOP				1: The tape is stopped during FF or REW near the BEGIN point.
		0002	REPT1				2: When the tape arrives at the end, it is rewound to the BEGIN point where
							it stops.
		0003	CONT				3: When the tape arrives at the end, it is rewound to the BEGIN point and
							played. This sequence is repeated.
112	BGN PRESET						For setting the BEGIN point.
113	END PRESET						For setting the END point.

The underlining denotes the factory mode setting.

29