Panasonic AJ-D250P operating instructions How to set the user default settings

Setup (Initial Settings)

3 Press the MENU-UP button or MENU-DOWN button to position the cursor at LOAD, and press the SET button.

The unit is set to the LOAD mode, and the LOAD screen appears on the video monitor.

SET–UP MENU <LOAD>

NO FACTORY (ALL)

FACTORY (NOT SYSTEM) USER (ALL)

USER (NOT SYSTEM)

4 Press the MENU-UP button or MENU-DOWN button to move the cursor to FACTORY (ALL), and press the SET button.

OIf the cursor is moved to FACTORY (NOT SYSTEM) and this operation is performed, all the menus except the SYSTEM menu will be restored to the factory settings.

OIf the cursor is moved to NO and this operation is performed, operation will return to the menu screen without restoring the factory settings.

5 Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position.

The menu setting procedure is now terminated.

How to set the user default settings

1 Set the LOCAL/MENU/REMOTE switch to the MENU position.

The unit is now set to the menu setting mode, and the menu screen appears on the video monitor.

2 Performs steps 2 through 6 of “How to perform the settings using the on-screen menus,” and change to the desired settings.

(See page 23)

3 Press the RESET button.

The unit is set to the default setting mode, and the default setting screen appears on the video monitor.

SELECT	MODE
	ESCAPE
	LOAD
	SAVE
	PROTECT

4 Press the MENU-UP button or MENU-DOWN button to position the cursor at SAVE, and press the SET button.

The unit is set to the SAVE mode, and the SAVE screen appears on the video monitor.

SET–UP MENU <SAVE>

NO

USER (ALL)

USER (NOT SYSTEM)

5 Press the MENU-UP button or MENU-DOWN button to move the cursor to USER (ALL), and press the SET button.

OIf the cursor is moved to USER (NOT SYSTEM) and this operation is performed, all the menus except the SYSTEM menu will be updated.

OIf the cursor is moved to NO and this operation is performed, operation will return to the menu screen without updating the settings.

6 The screen to confirm whether SAVE is to be initiated or canceled now appears. Press the MENU-UP button or MENU-DOWN button to move the cursor to the YES position, and press the SET button.

The settings are now saved in the memory.

SAVE OK?

NO

YES

7 Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position.

The menu setting procedure is now terminated.

24