Panasonic AJ-D250P Headphones jack, Volume control, Audio recording level controls, REW button

Parts and Their Functions

DHeadphones jack

When headphones are connected to this jack, they can be used to monitor the sound being recorded or played back.

EVolume control

This is used to adjust the volume to the headphones.

FAudio recording level controls

These controls are used to adjust the recording level for PCM audio signals CH1 and CH2.

GREW button

When this button is pressed, the tape is rewound, and the playback pictures can be monitored if “TAPE” has been selected for the “S/F/R EE SEL” setup menu item setting.

HSTOP button

When this button is pressed, the tape stops traveling, and the still picture can be monitored when the “TAPE” setting has been selected for the “S/F/R EE SEL” setup menu item.

In the stop mode, the drum still continues to rotate, and the tape remains tightly wrapped around the drum.

When the designated period of time has elapsed in the stop mode, the unit is automatically set to the standby OFF mode in order to protect the tape.

IFF button

When this button is pressed, the tape is fast- forwarded, and the playback pictures can be monitored if “TAPE” has been selected as the “S/F/R EE SEL” setup menu item setting.

JPLAY button

When this button is pressed, playback is commenced.

Recording is commenced when it is pressed together with the REC button.

KPAUSE/STILL button

When this button is pressed during recording, recording is stopped temporarily. When it is pressed again, recording is resumed.

When this button is pressed during playback, the still picture mode is established. When it is pressed again, playback is resumed.

MREMOTE connector

When the remote control (AG-A11) is plugged into this connector, the unit can be operated at a distance using the controls on the remote control instead of the unit’s function buttons.

Keep the LOCAL/MENU/REMOTE switch at the REMOTE position.

tte Recorder AJ-

RESET COUNTER

PAUSE/STILL	REC
DATA +	SET

REMOTE

Panasonic

(AG-A11)

NCOUNTER button

This button is used to switch the counter display. CTL: Set here to display the tape timer (control

signal).

TC: Set here to display the time code.

UB: Set here to display the user’s bit.

Remaining tape:

Set here to display the amount of remaining tape.

ORESET button

When this button is pressed in the CTL mode, the counter display is reset to 00:00:00:00.

LREC button

Recording is commenced when this button is pressed together with the PLAY button. When it is pressed during playback or in the STOP mode or standby OFF mode, the REC CHECK mode is established. (See page 15)

7