Setup (Initial Settings)
How to load the user default settings
1 Set the LOCAL/MENU/REMOTE switch to the MENU position.
The unit is now set to the menu setting mode, and the menu screen appears on the video monitor.
2 Press the RESET button.
The unit is set to the default setting mode, and the default setting screen appears on the video monitor.
SELECT | MODE |
| ESCAPE |
| LOAD |
| SAVE |
| PROTECT |
|
|
3 Press the
The unit is set to the LOAD mode, and the LOAD screen appears on the video monitor.
NO FACTORY (ALL)
FACTORY (NOT SYSTEM) USER (ALL)
USER (NOT SYSTEM)
4 Press the
OIf the cursor is moved to USER (NOT SYSTEM) and this operation is performed, the user settings for all the menus except the SYSTEM menu which are saved in the memory will be used for operation.
OIf the cursor is moved to NO and this operation is performed, operation will return to the menu screen without any changes made to the user settings which are saved in the memory.
5 Set the LOCAL/MENU/REMOTE switch to the LOCAL or REMOTE position.
The menu setting procedure is now terminated.
How to initiate the menu protect mode
By setting the unit to the menu protect mode, the opening of the setup menus can be disabled even if the front panel’s LOCAL/MENU/REMOTE switch is set to the MENU position.
1 Set the LOCAL/MENU/REMOTE switch to the MENU position.
The unit is now set to the menu setting mode, and the menu screen appears on the video monitor.
2 Press the RESET button.
The unit is set to the default setting mode, and the default setting screen appears on the video monitor.
SELECT | MODE |
| ESCAPE |
| LOAD |
| SAVE |
| PROTECT |
|
|
3 Press the
The unit is now set to the menu protect mode, and the screen to confirm whether menu protect is to be initiated or canceled now appears on the video monitor.
MENU PROTECT OK?
NO
YES
4 Press the
The menu screen now appears.
25
