Tapes, Tape Description | Panasonic AJ-D250P manual

Tapes

Tape		Description

	These tapes are designed to be used exclusively with consumer-use camera
	recorders.
	They can be used only for playback on this unit and only with the cassette adapter
Consumer-use	(optional accessory).
cassettes	Long-playing tapes (80 min. in standard mode, 120 min. in LP mode) cannot be
(S cassette)	used with this unit.
	It is recommended that Panasonic brand consumer-use DV tapes be used.
	Remember that inserting a cassette tape without using the cassette adapter can
	cause malfunctioning.

M cassettes	Tapes with up to 66 minutes of recording/playback time
M cassettes	(AJ-P12MP, AJ-P24MP, AJ-P33MP, AJ-P46MP, AJ-P66MP)
	(AJ-P12MP, AJ-P24MP, AJ-P33MP, AJ-P46MP, AJ-P66MP)

	Tapes with up to 184 minutes of recording/playback time
L cassettes	(AJ-P34LP, AJ-P66LP, AJ-P94LP, AJ-P126LP, AJ-5P92LP )

		For AJ-5P92LP cassette tapes, use a VTR supporting DVCPRO (25 Mbps) 184

		minute tapes.

EJECT

OFF

POWER								MENU
POWER							LOCAL	REMOTE
		DIGITAL VIDEO CASSETTE			Digital Video Cassette Recorder
INPUT SELECT
	S-VIDEO
LINE	OPTIONAUDIO
	REC LEVEL
BEGIN END		CH 1
AUDIO OUT		CH 2
SELECT							RESET COUNTER
CH 3							RESET COUNTER
CH 4		REW	STOP	FF	PLAY	PAUSE/STILL	REC
		MODE	DOWN MENU	UP	-	DATA +	SET

Align the cassette with the center of the insertion slot, and push it in gently.

The cassette tape is loaded automatically.

REMOTE

L cassette

OConsumer-use DV tapes can be used for playback only.

OConsumer-use tapes recorded in the LP mode cannot be played back.

ORecording onto consumer-use tapes is not possible, therefore the recording-related functions are inhibited.

OThe maximum speed at which consumer-use tapes can be forwarded or reversed is 32 times normal tape speed.

OThe still pictures of consumer-use tapes are subject to disturbance.

OIn the interest of protecting the tapes, it is recommended that consumer-use tape cue-up be kept to the minimum extent possible.

OThe maximum time for the STILL TIMER when a consumer-use tape is used has been set to 10 seconds.

When the unit has been left standing in the STILL mode, the standby OFF (half loading) mode will be established after one minute has elapsed.

ODuring consumer-use tape search and still picture operations, a display indicating that the time code cannot be read may appear.