6.4 OSD Option Adjustment
Learning about the menu system
-The buttons for OSD option adjustment include: Menu, ▲ , ▼ , ◄ , ► and OK buttons.
-Press Menu button to open the OSD Menu then press ◄ , ► button to select the pages. The pages are displayed in the following sequence (circular display):
Picture Window Audio Options Layout
-Press Menu button on the remote control or on the front panel, it will change in the following sequence:
| Main Menu | Exit |
|
|
| Sub Menu | Main Menu | Exit |
|
- | Press Menu button to open the OSD Menu. |
| ||
- | Use ◄ , ► buttons to select the pages. |
| ||
- | Use ▲ , ▼ buttons to select the items. | OK | ||
- | Press OK or ► button to enter. |
|
| |
- | Use ◄ , ► buttons to select or adjust. | Menu |
-Press Menu button to exit the Sub Menu or Main Menu.
the front panel
SOURCE MENU | SEL. | VOL. | STANDBY |
|
|
SOURCE MENU
6.5OSD Functions
1 Picture Page
[Input source is YPbPr 1, YPbPr 2, VGA or HDMI signal]
-Press Menu button, then press ◄ or ► button to choose the “Picture” item.
-Press ▲ or ▼ button to select “Brightness”, “Contrast”, “Saturation (only for YPbPr 1 and YPbPr 2)”, “Phase (only for VGA)”, “Peaking (only for YPbPr 1, YPbPr 2 and HDMI)”, “Frequency”, “Picture Mode” or “Color Temp”, then press OK or ► button to enter.
-Press ◄ or ► button to adjust;
-Press Menu button to exit Sub Menu or Main Menu.
Note: When the signal source is HDMI, you can’t adjust “Phase” and “Frequency”.
20