Akai PDP4273M manual Change Blocking Password, Chip Enable, Movie Block

Note: The initial password for the system is 0000.

Please operate “Change” at the first time.

If you had forgotten the password, please contact with service centre.

☼Change Blocking Password

-Press ▲ or ▼ button to select “Change” in Sub Menu, then press OK or ► button to pop up “Enter New Password”.

-Use 0~9 buttons to enter your new password.

-Press OK button to confirm and pop up “Confirm Password”.

-Use 0~9 buttons to enter your new password again.

-Press OK button to confirm.

-Press Menu button to exit Sub Menu or Main Menu.

Enter New Password

-	-	-	-	OK
Confirm			Password
-	-	-	-	OK

☼V-Chip Enable

-Press ▲ or ▼ button to select “V-Chip Enable” in Sub Menu, then press ◄ / ► button to select “On” or “Off”.

-“Movie Block” and “TV Block”, these functions are activate, while “V-Chip” select “On”.

-“Movie Block” and “TV Block”, these functions are inactivate, while “V-Chip” select “Off”.

-Press Menu button to exit Sub Menu or Main Menu.

☼Movie Block

-Press ▲ or ▼ button to select “Movie Block” in Sub Menu, then press OK or ► button to pop up “ Movie Content Blocking” Menu.

-Press ▲ or ▼ button to select “G”, “PG”, “PG 13”, etc.

-Press OK button to lock (display “”) or unlock (doesn’t display “”).

-When display “”, you can not watch the programs.

-When doesn’t display “”, you can watch the programs.

-Press Menu button to exit Sub Menu or Main Menu.

(Continued on next page)

28