Conceptronic C54PSERVU user manual A r d w a r e Installation

Page 12

2 . H a r d w a r e I n s t a l l a t i o n

•Unpack the print server package and verify that all the items listed in the section 1.2 are provided.

•Connect the print server to the printer you want to share on the network.

•Connect the print server to your network by attached the network cable to the UTP port of the print server.

•Connect the power adapter to the print server. The print server will perform the Power-On-Self-Test (POST) after it is powered on. During the POST, the Status and Ready LEDs will be on. When the LEDs are unlighted, the print server is ready.

NOTE1: MUST use the power adapter shipped with the print server, do NOT use any other power adapter from any sources.

NOTE2: To prevent the compatibility problem between print server and a few printer, it is recommended that you power on the print server before the printer.

7

Image 12

Contents Conceptronic C54PSERVU Wireless Print Server VersionCopyright Disclaimer Contents Windows XP SP2 Setup N t r o d u c t i o n Product IntroductionProduct Package Network Printing ArchitecturePrint Server Network Functions Network Printing Functions for ClientsPtpp Network Printing Functions for Network Server Network Printing EnvironmentNetWare Network see below Contents of the User’s Manual Firmware & Printing FunctionA r d w a r e Installation I n d o w s P e e r t o P e e r N e t w o r k System ArchitectureAdministrator Installation and Setup Page Page Page Page Administrator Utilities Client Installation and Setup Page Network Ports Quick Setup Client UtilitiesRemote Ports Utility Page Windows Add Printer Procedure Page Page Page Windows NT/2000/2003 Server Installation and Setup I n d o w s N T / 2 0 0 0 / 2 0 0 3 N e t w o r kUser Installation and Setup NetWare 3.x/4.x/5.x Installation & Setup Installation Using PconsoleConfiguring as Print Server Mode E t W a r e N e t w o r kPage Multiple print queues and printer objects N I X S y s t e m N e t w o r k Configure Remote LPD Printing on the Host Verify Print Server’s IP Address203.66.191.12pserver Page O n f i g u r a t i o n U t i l i t y Search for All Available Print ServerStatus of Print Server Setup the Print Server AppleTalk Configuration General ConfigurationNetware Print Server Configuration Printer Server Name SMB Group NameSystem Configuration TCP/IP Configuration Wireless Configuration Ssid DefaultInfrastructure Mode Ad Hoc Mode Page WEP Security Mode For example 01234567890123456789abcdef or administratorWPA-shared key Security Mode Snmp Configuration Wizard Page Page Report Login E b M a n a g e m e n tDevice Status System Printer3 TCP/IP 4 SMBSnmp NetWareSetup Wizard System AppleTalkAdvanced Settings WirelessGeneral Setting Encryption WPA-PSK Security Mode 4 TCP/IP Site Survey5 SMB NetWare Save Settings AppleTalk Enable Enable or disable AppleTalkSystem Tools 8.5.1 Load Default Upgrade Firmware from BrowserSystem Setup Print Server Side P P P r i n t i n gClient Side Page Page Page I n d o w s X P S P 2 S e t u p Page