Conceptronic C54PSERVU user manual TCP/IP Configuration

Page 43

7.9TCP/IP Configuration

Double Click “TCP/IP” icon and the TCP/IP configuration window will pop-up.

You can configure the print server to automatically get IP from DHCP server or manually specify static IP. The print server also has a built-in DHCP server. You can enable this DHCP server and let it manages IP for you.

Click the “IP” button to enter the IP setting page. If you need the print server to automatically get an IP from DHCP server, select “Auto IP”. You also can select “Static IP” to manually assign “IP Address”, “Subnet Mask” and “Gateway” for the print server.

Click the “DHCP Server” button to enter the DHCP server’s setting page. You can “Enable/Disable” the DHCP server or set “Auto” and assign a range of IP addresses here. The DHCP server is disabled by default. If “Auto” is selected, the DHCP Server of print server will be enabled only when there is no other DHCP Server within the network.

When “Enable” or “Auto” is selected, you have to configure “Starting Address”, “Range”, “Subnet Mask”, “Gateway Address” and “DNS”. The print server will assign a unique IP for each client.

38

Image 43
Contents Version Conceptronic C54PSERVU Wireless Print ServerCopyright Disclaimer Contents Windows XP SP2 Setup Network Printing Architecture N t r o d u c t i o nProduct Introduction Product PackageNetwork Printing Functions for Clients Print Server Network FunctionsPtpp Network Printing Environment Network Printing Functions for Network ServerNetWare Network see below Firmware & Printing Function Contents of the User’s ManualA r d w a r e Installation System Architecture I n d o w s P e e r t o P e e r N e t w o r kAdministrator Installation and Setup Page Page Page Page Administrator Utilities Client Installation and Setup Page Client Utilities Network Ports Quick SetupRemote Ports Utility Page Windows Add Printer Procedure Page Page Page I n d o w s N T / 2 0 0 0 / 2 0 0 3 N e t w o r k Windows NT/2000/2003 Server Installation and SetupUser Installation and Setup E t W a r e N e t w o r k NetWare 3.x/4.x/5.x Installation & SetupInstallation Using Pconsole Configuring as Print Server ModePage Multiple print queues and printer objects N I X S y s t e m N e t w o r k Verify Print Server’s IP Address Configure Remote LPD Printing on the Host203.66.191.12pserver Page Search for All Available Print Server O n f i g u r a t i o n U t i l i t yStatus of Print Server Setup the Print Server General Configuration AppleTalk ConfigurationPrinter Server Name SMB Group Name Netware Print Server ConfigurationSystem Configuration TCP/IP Configuration Ssid Default Wireless ConfigurationInfrastructure Mode Ad Hoc Mode Page For example 01234567890123456789abcdef or administrator WEP Security ModeWPA-shared key Security Mode Snmp Configuration Wizard Page Page Report E b M a n a g e m e n t LoginPrinter Device Status System4 SMB 3 TCP/IPNetWare SnmpAppleTalk Setup Wizard SystemWireless Advanced SettingsGeneral Setting Encryption WPA-PSK Security Mode Site Survey 4 TCP/IP5 SMB NetWare AppleTalk Enable Enable or disable AppleTalk Save SettingsUpgrade Firmware from Browser System Tools 8.5.1 Load DefaultP P P r i n t i n g System Setup Print Server SideClient Side Page Page Page I n d o w s X P S P 2 S e t u p Page