Conceptronic C54PSERVU user manual 5 SMB, Snmp

Page 63

If you need the print server to automatically get an IP from DHCP server, select “Enable Obtain TCP/IP Settings Automatically (Use DHCP/ BOOTP)”. You also can select “Disable Use the following TCP/IP Settings” to manually assign “IP Address”, “Subnet Mask” and “Gateway” for the print server.

You can enable/disable or set auto for the print server’s DHCP server. The DHCP server is disabled by default. If the DHCP Server is enabled or set Auto, you have to assign a range of IP addresses here. Fill in the “Start IP”, “Range”, “DNS”, “Subnet Mask” and “Gateway”, and the print server will assign a unique IP for each client. Note that when “Auto” is selected, the DHCP Server of the print server will be enabled only when there is no other DHCP Server within the network.

8.4.5 SMB

You can enable/disable the SMB protocol from here. If SMB is enabled, enter the “SMB Group Name” to specify the SMB group that this print server belongs to. All PC should join the same group before they can use this print server by SMB protocol.

8.4.6 SNMP

58

Image 63
Contents Version Conceptronic C54PSERVU Wireless Print ServerCopyright Disclaimer Contents Windows XP SP2 Setup Network Printing Architecture N t r o d u c t i o nProduct Introduction Product PackageNetwork Printing Functions for Clients Print Server Network FunctionsPtpp Network Printing Environment Network Printing Functions for Network ServerNetWare Network see below Firmware & Printing Function Contents of the User’s ManualA r d w a r e Installation System Architecture I n d o w s P e e r t o P e e r N e t w o r kAdministrator Installation and Setup Page Page Page Page Administrator Utilities Client Installation and Setup Page Client Utilities Network Ports Quick SetupRemote Ports Utility Page Windows Add Printer Procedure Page Page Page I n d o w s N T / 2 0 0 0 / 2 0 0 3 N e t w o r k Windows NT/2000/2003 Server Installation and SetupUser Installation and Setup E t W a r e N e t w o r k NetWare 3.x/4.x/5.x Installation & SetupInstallation Using Pconsole Configuring as Print Server ModePage Multiple print queues and printer objects N I X S y s t e m N e t w o r k Configure Remote LPD Printing on the Host Verify Print Server’s IP Address203.66.191.12pserver Page Search for All Available Print Server O n f i g u r a t i o n U t i l i t yStatus of Print Server Setup the Print Server General Configuration AppleTalk ConfigurationPrinter Server Name SMB Group Name Netware Print Server ConfigurationSystem Configuration TCP/IP Configuration Wireless Configuration Ssid DefaultInfrastructure Mode Ad Hoc Mode Page For example 01234567890123456789abcdef or administrator WEP Security ModeWPA-shared key Security Mode Snmp Configuration Wizard Page Page Report E b M a n a g e m e n t LoginPrinter Device Status System4 SMB 3 TCP/IPNetWare SnmpAppleTalk Setup Wizard SystemAdvanced Settings WirelessGeneral Setting Encryption WPA-PSK Security Mode Site Survey 4 TCP/IP5 SMB NetWare AppleTalk Enable Enable or disable AppleTalk Save SettingsUpgrade Firmware from Browser System Tools 8.5.1 Load DefaultSystem Setup Print Server Side P P P r i n t i n gClient Side Page Page Page I n d o w s X P S P 2 S e t u p Page