
In the Infrastructure mode, you have to let the print server associate with an access point. You let the print server scan for an available access point automatically or manually assign the SSID of the access point you want to use.
If you select to let the print server scan for an available access point, the following window will pop up:
The list is the scanned available access points. Select an access point in the list and click “Next”. If you cannot find the access point that you want to use, click “Scan” to let the print server scan again.
Ad Hoc Mode:
In the
If you select to let the print server scan for an active wireless station, the following window will pop up.
40