Graco 15V337, 15V336 important safety instructions Fire and Explosion Hazard

Page 2

Warnings

The following warnings are for the setup, use, grounding, maintenance and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risks. When these symbols appear in the body of this manual or on warning labels, refer back to these Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout the body of this manual where applicable.

WARNING

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion:

Use equipment only in well ventilated area.

Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop cloths (potential static arc).

Keep work area free of debris, including solvent, rags and gasoline.

Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes are present.

Ground all equipment in the work area. See Grounding instructions.

Use only grounded hoses.

Hold gun firmly to side of grounded pail when triggering into pail. Do not use pail liners unless they are antistatic or conductive.

Stop operation immediately if static sparking occurs or you feel a shock, Do not use equipment until you identify and correct the problem.

Keep a working fire extinguisher in the work area.

ELECTRIC SHOCK HAZARD

This equipment must be grounded. Improper grounding, setup, or usage of the system can cause electric shock.

Turn off and disconnect power at main switch before disconnecting any cables and before servicing or installing equipment.

Connect only to grounded power source.

All electrical wiring must be done by a qualified electrician and comply with all local codes and regulations.

2

332459A

Image 2
Contents Important Safety Instructions Manual. Save these instructionsFire and Explosion Hazard Equipment Misuse Hazard Related Manuals Mounting OverviewLocation Connections Key Conections Installation Example Supplied in AWI ModuleAccessories or User-Supplied Components Installation Example Set Up an Automatic IP Address Set Up IP Address Manually System Initialization Password Recovery Settings Tab System ConfigurationSystem Time Upgrade AWIClick Upgrade LanguageAccounts Network Local Network Configuration Manual ConfigurationRecover IP Settings Network Tab System Configuration System Configuration Add or Remove Gateways Line3Add or Remove Devices Materials Tab To ManualReplace AWI Board Part Description Qty Wiring DiagramsKit 15V337 Advanced Web Interface Module DescriptionQty Kit 15V336 Advanced Web Interface Server HubPart Accessories CablesDimensions Graco Standard Warranty Graco Information