Installation
Installation
Overview
NOTE: Refer to this manual first, then look in your system manual for information specific to your system
(the Informer, for example, or the ProControl 1KE). ProMix 2KS and ProMix 3KS Users: Please refer to Manual 313386.
The Advanced Web Interface (AWI) is an accessory that works with many Graco devices and gateways. The AWI allows communication with a personal computer (PC) over an ethernet. With the AWI, users can view and change system setup parameters and create reports from a remote PC. This manual contains installation and setup information common to all devices. It includes sections on how to configure your computer, initialize the system, configure the main system settings, and set up your network.
NOTE: Screen views in this manual are shown using Microsoft Windows 7.
Location
The AWI module may be installed in a local network of Graco devices, such as a network of ProControl 1KEs. It also may be installed in a Local Area Network (LAN).
Do not install equipment approved only for
Install the AWI near your system’s control module, in a
Mounting
1.See Dimensions, page 27.
2.Ensure that the wall and mounting hardware are strong enough to support the weight of the equipment, fluid, hoses, and stress caused during operation.
3.Using the equipment as a template, mark the mounting holes on the wall at a convenient height for the operator and so equipment is easily accessible for maintenance.
4.Drill mounting holes in the wall. Install anchors as needed.
5.Bolt equipment securely.
332459A | 5 |