Pandigital manual Scan a Photo, Power on the PhotoLink Scanner

Page 11

Power on the PhotoLink Scanner

1.Press the Power button. The power indicator light blinks.

Note: For more information on the indicator lights, refer to “Indicator Lights” on page 9.

2.Wait until the power indicator stops blinking and then goes off. The Status/ card indicator will light up, indicating that the scanner is ready.

Note: Do not insert an original photo into the feeding slot when the power indicator is blinking. The original photo will not be scanned.

Scan a Photo

1.Insert your photo into one of the plastic protection sleeves (included with scanner.)

2.With the side to be scanned facing upward and in correct orientation as indicated by the orientation guide, place one edge of the photo on the scanner and adjust the guide lever so that the photo aligns against the left side of the feeding slot.

3.Insert the photo into the feeding slot.

WARNING: Do not scan glossy photos in humid environments (humidity higher than 70% RH); the surface of the photo will become sticky and cause the scanner to jam.

11

Image 11

Contents Scanner Table of Contents UGEPANSCN01V1.5 Read This First Important Safety PrecautionsDisclaimer Disposal of this product What’s In the BoxCopyright Front view PhotoLink Scanner DiagramIntroduction Rear view Indicator Lights onScanner Indicator Lights Operating the Scanner Initial SetupScan a Photo Power on the PhotoLink Scanner12 Orientation of the Original and Scanned Image Suitable and Unsuitable Original TypesPhoto Protection Sleeves Image Crop Make Connection to PC Connect PhotoLink Scanner to a PCSystem Requirements for PC 17 For Windows Vista Users Windows Explorer with Microsoft Vista ViewFor Windows XP Users Macintosh Systems Safely Disconnect the Scanner from PCWindows Systems System Requirements Installing the Scan2PC ManagerScan2PC Manager Scanner to PC Utility Using the Scan2PC Manager Supported Memory Cards File Naming and Storage Rules Scanner MaintenanceCleaning the PhotoLink Scanner Cleaning the Roller Cleaning the Image Sensor Storing the PhotoLink Scanner Calibrate the PhotoLink ScannerSpecification PhotoLink One Touch Scanner Technical SpecificationsCheck the following Frequently Asked Questions/ TroubleshootingLimited Warranty FCC Part 15 Information FCC Statement