Pandigital PhotoLink Scanner manual For Windows XP Users

Page 19

Note: Do not select “Take no Action” or “Set AutoPlay” to default in the Control Panel.

For Windows XP Users

When the PhotoLink Scanner is connected with your PC via a USB cable with an inserted SD Card, a pop-up “PDSCAN” window will appear.

To view photos on the PC while scanning, change Windows Explorer’s setting as follows:

1.Select “Open folder to view files using Windows Explorer”.

2.Select the “Always do the selected action” checkbox.

3.Click OK.

19

Image 19

Contents Scanner Table of Contents UGEPANSCN01V1.5 Read This First Important Safety PrecautionsDisclaimer Copyright What’s In the BoxDisposal of this product Introduction PhotoLink Scanner DiagramFront view Rear view Indicator Lights onScanner Indicator Lights Operating the Scanner Initial SetupScan a Photo Power on the PhotoLink Scanner12 Orientation of the Original and Scanned Image Suitable and Unsuitable Original TypesPhoto Protection Sleeves Image Crop System Requirements for PC Connect PhotoLink Scanner to a PCMake Connection to PC 17 For Windows Vista Users Windows Explorer with Microsoft Vista ViewFor Windows XP Users Windows Systems Safely Disconnect the Scanner from PCMacintosh Systems Scan2PC Manager Scanner to PC Utility Installing the Scan2PC ManagerSystem Requirements Using the Scan2PC Manager Supported Memory Cards Cleaning the PhotoLink Scanner Scanner MaintenanceFile Naming and Storage Rules Cleaning the Roller Cleaning the Image Sensor Storing the PhotoLink Scanner Calibrate the PhotoLink ScannerSpecification PhotoLink One Touch Scanner Technical SpecificationsCheck the following Frequently Asked Questions/ TroubleshootingLimited Warranty FCC Part 15 Information FCC Statement