The photo will be fed through the slot and scanned automatically. The Power and Status/card indicator lights blink while scanning.
Note: Refer to page 13 for how to insert photos and other types of originals.
When scanning is completed, the Power and Status/card indicator lights will keep blinking for a while, indicating that the scanner is processing the image and storing the file onto the memory card.
Wait until the indicator lights stop blinking before inserting and scanning the next photo.
WARNING: Insert only one sheet at a time. Insert the next original photo only when the previous one is done. Otherwise the scanner will fail to function properly.
Notes:
•Do not remove the memory card or disconnect the power supply while the indicators are blinking.
•This scanner only supports output images in JPEG (.jpg) format, and the date/ time attribute will not be added.
•For more information on how this scanner stores the scanned image files on the memory card, refer to “Orientation” on page 13. If the memory card is near full (lower than 1MB), the status/card indicator blinks (refer to “Indicator Lights” on page 9). Use another card or delete some files on it if necessary.
1.To power down the scanner after all photos are scanned, press and hold the power button for one second. The power indicator will blink and then go off.
2.Now it is OK to disconnect the power and remove the memory card from the scanner.