MPI Technologies 2100 manual Error Messages, Supported Ipds NACKs

7 Error Messages

Overview of IPDS NACK’s that can be returned to the system.

7.1 Supported IPDS NACK's:

Command Reject Exceptions

0x800100: Invalid IPDS Command Code

0x800200: Invalid IPDS Command Sequence

0x800400: Data received after ARQ

0x80E000: Invalid IPDS Command Length

Equipment check with intervention-Required Exception (MPI Tech LinkCom/HostCom only)

0x501000: Printer hardware exception

0x50F200: Print overrun

0x50F500: Image generator exception

0x50F600: Offset stacker exception

0x50F700: Duplex media source exception

0x50F800: Input media source exception

Intervention-Required Exceptions

0x400000:	Printer Not Ready
0x400100:	Printer Out of Paper
0x400200:	Printer exit tray full
0x400400:	Printer out of toner
0x400500:	Empty fuser oil supply
0x400600:	Invalid media
0x403100:	Paper length check
0x403300:	Paper width check
0x40E000:	Paper jam not cleared
0x40E100:	Out of paper (secondary input)
0x40E200:	Transport requires corrective action
0x40E300:	Fuser requires corrective action
0x40E500:	Paper jam recovery needed
0x40E600:	Door open
0x40E700:	Paper specification check

Equipment check exception

0x10F100: Permanent hardware exception

0x10F200: Print overrun

0x10F300: Magnet settings changed

0x10F400: Serializer parity exception

0x10F500: Image generator exception

0x10FA00: Media size sensor error

Data-Check Exceptions

0x082100: Undefined Character

0x082900: Double-byte coded font section is not activated or is invalid

30